Journal of Welding and Joining

Research Paper

Page Path

HOME
ARTICLE CATEGORY
Research Paper

Article type

Research on WAAM Deposition Efficiency of STS436: Youngwook Choi, Hansol Kim, Jongho Jeon, Sangmin Lee, Injong Jin, Jungho Cho; J Weld Join. 2025;43(1):103-110. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.11; Full text PubReader ePub PDF

Effects of Laser Surface Texturing and Injection Molding Parameters on the Direct Joining of AHSS and PA 6: Yusin Kim, Changkyoo Park; J Weld Join. 2025;43(1):92-102. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.10; Full text PubReader ePub PDF

Laser Structuring Process Parameters to Enhance Joint Quality of Aluminum Alloys in Insert Casting Method: NaRae Yoon, JunHo Hwang, CheolUng Lee et al.; J Weld Join. 2025;43(1):86-91. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.9; Full text PubReader ePub PDF

Study on Additive Manufacturing Optimization of High Hardness Material (AISI M4) Based on Preheating Process Using High Energy Directed Energy Deposition (DED) Technology: Yongjae Kwon, SeongSeon Shin, JongHoon Lee, SungWook Kim, JunHo Hwang, Hyun Deok Kim; J Weld Join. 2025;43(1):79-85. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.8; Full text PubReader ePub PDF

Influence of Longitudinal Laser Beam Oscillation on Hot Cracking and Stress Distribution in Laser-Welded Aluminum: Sanghoon Kang, Jason Cheon, Minjung Kang; J Weld Join. 2025;43(1):70-78. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.7; Full text PubReader ePub PDF

Numerical Evaluation of Weld Pool Size, Distortion and Residual Stresses in Electron Beam Weld Joint of Thick SA312 Type 304 L Pipe and its Validation: Manoj Kumar Jangid, Suranjit Kumar, Joyson Derose D, P. K. Singh, M. N. Jha; J Weld Join. 2025;43(1):57-69. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.6; Full text PubReader ePub PDF

Ultrasonic Welding Characteristics of Aluminum Alloy and PA6-GF40 Composites: Young-Min Kim, Byeong-Jin Kim, Insung Hwang; J Weld Join. 2025;43(1):49-56. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.5; Full text PubReader ePub PDF

Electromagnetic Self-Piercing Riveting of 1.5 GPa Hot Stamping Boron Steel and Aluminum Alloy: Min-Seok Kim, Min-Woo Park, Jung-Hyun Lee, Ji-Yeon Shim; J Weld Join. 2025;43(1):39-48. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.4; Full text PubReader ePub PDF

AI-Based Nondestructive Quality Evaluation of Friction Stir Welded Joints in Aluminum Parts for Electric Vehicles: Sanghyeok Jeong, Jooheon Park, Jinyoung Yoon, Jaesung Kim; J Weld Join. 2025;43(1):30-38. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.3; Full text PubReader ePub PDF

Effects of Laser-Assisted Thermal Treatment on Self-Piercing Riveting (SPR) of DP 1180 and CFRP: Wonjung Ju, Dong Hyuck Kam, Dongchoul Kim, Minjung Kang; J Weld Join. 2025;43(1):21-29. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.2; Full text PubReader ePub PDF

Effect of Indentation Depth on Tensile Shear Strength in Ultrasonic Welding of A1050 Aluminum Alloys and C1100 Oxygen-free Copper Alloys: Young-Min Kim, Byeong-Jin Kim, Insung Hwang; J Weld Join. 2025;43(1):11-20. Published online February 28, 2025; DOI: https://doi.org/10.5781/JWJ.2025.43.1.1; Full text PubReader ePub PDF

A Study of TIG Welds of Small Diameter STS 316L Tubes: Eunhye Park, Byounglok Jang; J Weld Join. 2024;42(6):686-694. Published online December 31, 2024; DOI: https://doi.org/10.5781/JWJ.2024.42.6.13; Full text PubReader ePub PDF

Investigation on the Surface Modification of High-Mn Lightweight Steel Through 3D Printing: Joonoh Moon, Jeong-Hun Kim, Jin-Su Park; J Weld Join. 2024;42(6):679-685. Published online December 31, 2024; DOI: https://doi.org/10.5781/JWJ.2024.42.6.12; Full text PubReader ePub PDF

Fundamental Study on the Application of Laser Peening for Residual Stress Improvement in Marine High-Pressure Fuel Pipes: Jaeook Jeon, Sunghwan Kim, Pyeongsoo Kim, Jongdo Kim; J Weld Join. 2024;42(6):671-678. Published online December 31, 2024; DOI: https://doi.org/10.5781/JWJ.2024.42.6.11; Full text PubReader ePub PDF

Analysis of Dendrite Formation under Laser Welding Conditions of Ti-6Al-4V Alloy and Removal through Annealing Conditions: Minjae Kim, Jiyong Park; J Weld Join. 2024;42(6):661-670. Published online December 31, 2024; DOI: https://doi.org/10.5781/JWJ.2024.42.6.10; Full text PubReader ePub PDF

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

MOST VIEWED MOST CITED

9,007	Strength Evaluation of Welded Aluminum T-joints, as a Function of Its Welding Process, Execution, Filler Material, and Weld Root Penetration
5,841	Recent Progress of TGV Technology for High Performance Semiconductor Packaging
4,739	Statistical Analysis of Korean Welding Industry (V)
4,081	An Overview of Resistance Element Welding with Focus on Mechanical and Microstructure Joint and Optimization in Automotive Metal Joints
3,148	Review on Ultrasonic and Laser Welding Technologies of Multi-Layer Thin Foils for the Lithium-Ion Pouch Cell Manufacturing

+more

Cited By 7	A Review on Effects of Weld Porosity in Laser-Arc Hybrid Welding for Aluminum Alloys
Cited By 6	An Overview of Resistance Element Welding with Focus on Mechanical and Microstructure Joint and Optimization in Automotive Metal Joints
Cited By 6	Strategy of Suppressing the Solidification Cracking Susceptibility of 247LC Superalloy Weld Metals using Commercial Ni-Based Fillers
Cited By 5	Effect of Carburization on the Microstructure and Laser Weldability of 316L Stainless Steel
Cited By 4	Prediction of Weld Tensile-Shear Strength using ANN Based on the Weld Shape in Aluminum Alloy GMAW

+more

Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.

Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.

Free archive
Anyone may access any past or current articles without logging in.

Editorial Office: #304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511 Fax: +82-2-538-6510 E-mail: koweld@kwjs.or.kr