Research Papers Tensile Strength Property with PdCo-Cu Multi-Layer Lamination and Heat Treatment of MEMS Probe for Probe Card

So-Hee Hyun, Mi-Song Kim, Won Sik Hong, Jae-Hyung Lee, Tae-Jong Lee

J Weld Join. 2024;42(5):560-566.

Research Papers Enhancement in Mechanical Properties of AA5052 Sheet for Small Ship by Cold Roll-Bonding Process

Yu-Jong Roh, Hyeokjun Yang, Jun Yeong Jeong, Hyunkyoo Cho, Seong-Hee Lee

J Weld Join. 2024;42(5):550-559.

Research Papers A Study on the Effects of Offset and Welding Speed on Bead Shape and Welding Defects in the FCA Fillet Welding Process

Junsung Bae, Sang-Hyun Ahn, Gwang-Ho Jeong, Seonmin Kim, Dae-Won Cho, Seokyoung Ahn

J Weld Join. 2024;42(5):539-549.

Research Papers Study on the Electron Beam Repair Welding of 5000 Aluminum Alloys

Insung Choi, Heon min Seo, In-Chul Jung, Jungsoo Choi, In-Duck Park, Jeong Suh

J Weld Join. 2024;42(5):530-538.

Research Papers Fracture Toughness Estimate of H-Section Steel for Offshore Structure

Gyubaek An, Jiseung Lee, Wonjun Jo, Chiung Sun, Jeongung Park

J Weld Join. 2024;42(5):521-529.

Research Papers Quality Classification of Multi-Layer Copper Foil Stacks Welds for Ultrasonic Welding Using CNN and RNN

Seon-myoung Hong, Jae-woo Cho, Hee-seon Bang

J Weld Join. 2024;42(5):514-520.

Research Papers Analyzing the Influence of Welding Process Selection on Residual Stresses in Tube-to-Tubesheet Welded Joints

Manoj Kumar Jangid, Vikram Roy, M. T. Kamble, P. K. Singh

J Weld Join. 2024;42(5):495-513.

Research Papers A Primary Study on the Applicability of Gel-Type Filler Materials to Root Pass Welds of the Thick Plate

Young-Min Kim, Sangwoo Nam, Insung Hwang, Jason Cheon, Byeong-Jin Kim

J Weld Join. 2024;42(5):487-494.

Research Papers Evaluation of Quality for Flow Drill Screw (FDS) Joining Process Based on Loosening Torque

Tae-Jeong Kim, Se-Jin Ko, Wook-Jin Oh, Ji-Hong Lee

J Weld Join. 2024;42(5):481-486.

Research Papers Characteristics of Solidification Cracking for Ni-P Coated Cu-Al5052 Single-Mode Fiber Laser Welds

Ye-Ji Yoo, Eun-Joon Chun

J Weld Join. 2024;42(5):472-480.

Research Papers Evaluation of Secondary Buckling and Ultimate Strength Behaviour According to Boundary Conditions of Curved Plate Subjected to Compressive Load

Myung-Su Yi, Jae-Yong Ko, Joo-Shin Park

J Weld Join. 2024;42(5):463-471.

Research Papers Revisiting the Concept of Property Optimization of Low Temperature Phase Transformed Microstructures of GIGASTEEL Welds

Gyuyeol Bae, Joonoh Moon, Bo-Young Jeong

J Weld Join. 2024;42(5):458-462.

Research Papers Research on the Optimization of Oscillation for the Joint Quality of Laser Welded Joints in Automobile Seat Frames

JiYoung Shin, HyeonJe Kim, JaeYong Jang, HyeongJong Kim, Yeong-Do Park

J Weld Join. 2024;42(5):445-457.

Research Papers Recent Advences in Laser and Laser-Assisted Bonding (LAB) Technologies for Micro-Soldering and Applications to Mini-LED

Jun Ho Ku, Jae Pil Jung

J Weld Join. 2024;42(4):428-436.

Research Papers Liquid Hydrogen Properties Affecting Fracture Toughness

Daehee Seong, Wonjun Jo, Jisun Roh, Junggoo Park, Jeongung Park, Donghyeon Choi, Gyubaek An

J Weld Join. 2024;42(4):414-427.

Research Papers Effect of Welding Process on Microstructure and Mechanical Properties of Boron Containing Modified 9Cr-1Mo Steel

Gopa Chakraborty, P. Vasantharaja, B. Shashank Dutt, M. Nani Babu, C. R.Das, A. Moitra, M. Vasudevan

J Weld Join. 2024;42(4):406-413.

Research Papers Modelling for Temperature Distribution Calculation using Surface Scattering of Free Electrons in Finite Metal Solid

Woo-Jae Seong

J Weld Join. 2024;42(4):396-405.

Research Papers Thermal and Frequency Response Analysis on Friction Stir Welding Tool with Different Materials by Using FEA Method

Rohit Pandey, Himanshu Shukla, Balendra Bhaskar, Ashish Shrivastava

J Weld Join. 2024;42(4):388-395.

Research Papers Bonding Properties of Package-on-Package Stack Interconnection Using by 150 ㎛ Height Copper Posts

Mi-Song Kim, So-Hee Hyun, Joo Young Bae, Won Sik Hong

J Weld Join. 2024;42(4):378-387.

Research Papers Quality Prediction Algorithm for Flow Drilling Screw Joining of 590 MPa High-Strength Steel and 6xxx Series Aluminum Alloy

Yu Ri Choi, Dong Yoon Kim, Jun Myoung ang, Ji Young Yu, Seung Hwan Lee

J Weld Join. 2024;42(4):366-377.

Research Papers Review of Recent Additive Manufacturing and Welding Research with Application of Physics-Informed Neural Networks

Taehwan Ko, Heuisu Kim, Yeoungcheol Shin, Dukyong Kim, Young Hoon Lee, Jinsu Hong, Seung Hwan Lee

J Weld Join. 2024;42(4):357-365.

Research Papers Detection of Hot Cracking for 6000 Series Aluminum Alloys using a Multi-Sensor Based Deep Learning Model

Geonmin Kim, Jaeheon Lee, Seung Hwan Lee

J Weld Join. 2024;42(4):345-356.

Research Papers Review on Welding Process Monitoring Based on Deep Learning using Time-Series Data

Jaeheon Lee, Hwani Hwang, Taesoon Jeong, Dukyong Kim, Jeongbin Ahn, Gyuchan Lee, Seung Hwan Lee

J Weld Join. 2024;42(4):333-344.

Research Papers A Study on Laser Welding of Dissimilar Materials between Aluminum and Copper (Ⅱ) - Development of Laser Welding Quality Verification Technique -

Yong Kim, Dong Kyu Kim, Je In Lee

J Weld Join. 2024;42(3):311-323.

Research Papers Mean Stress Correction in Low Cycle Fatigue Life of High Strength Steels

Seong-Won Jang, Ji-Hoon Kim, Jeong-Hoon Lee, Myung-Hyun Kim

J Weld Join. 2024;42(3):298-310.

Research Papers Effect of Welding Heat Input on the Simulated Heat-Affected-Zone Toughness for Yield Strength 390MPa Class TMCP Steel Plate

Ho-Seop Sim, Ki-Hyuk Kim, Joon-Ho Sung, Ryeo-Sun Ha, Kyeong-Taek Lim, Do-Hyung Kim, Hyun-Uk Hong

J Weld Join. 2024;42(3):292-297.

Research Papers Influence of Oxide Inclusions on the Creep Properties of Electron Beam Welds in Ti-added Reduced Activation Ferritic/Martensitic Steel

Jae-Yeon Han, Yoon-Hwan Jo, Chiwon Kim, Chang-Hoon Lee, Joonoh Moon, Hyun-Uk Hong

J Weld Join. 2024;42(3):282-291.

Research Papers Finite Element Modeling of Ring and Gaussian Dual Laser Heat Sources for Aluminum Butt Welding

Jongwook Jung, Qing-Ye Jin, Jooyong Cheon, Changwook Ji, Wookjin Lee

J Weld Join. 2024;42(3):269-281.

Research Papers A Review of the Analysis of Austenitic Stainless Steel, Welding Methods, and Ultra-Low Temperature Characteristics for the Manufacture of Liquefied Hydrogen Tanks

JaeHan Park, HongKwang Kim, JeongYeol Park, ChangWook Ji

J Weld Join. 2024;42(3):257-268.

Research Papers A Study on the Propagation of Chloride-Induced Stress Corrosion Cracking for Austenitic Stainless Steel at Corrosion Environment

Dong-Jin Oh, Gi-Dong Kim, Yong-Joon Kang, Sang-Woo Song

J Weld Join. 2024;42(3):248-256.

Research Papers Welding Heat-induced Microstructural Variations in Inconel 718 Superalloy: A Comparative Investigation between Conventionally Manufactured and 3D Printed Materials

Gitae Park, Yongjoon Kang, Chan Kyu Kim, Seolbin Jeong, Sang Woo Song

J Weld Join. 2024;42(3):239-247.

Research Papers A Study on the Applicability of A-TIG Welding of Semi-Automatic Cold Wire Feeding Process for Cryogenic Stainless Steel Pipes

Hee-Keun Lee, Kwang-Hee Yun

J Weld Join. 2024;42(3):231-238.

Research Papers Review on Ultrasonic Welding Quality Monitoring Technology

Byeong-Jin Kim, Insung Hwang, Seong-Guk Son, Chanhoon Park, Young-Min Kim

J Weld Join. 2024;42(2):215-222.

Research Papers Mechanical Properties of Fe-TiC Composites for Friction Stir Welding Tool Application by a Spark Plasma Sintering

Bum-Soon Park, Min-Hyeok Yang, Hyun-Kuk Park

J Weld Join. 2024;42(2):206-214.

Research Papers Effect of Cr on the Hot Ductility of Austenitic Fe-Mn-Al-C Lightweight Steel

Seonghoon Jeong, Joonoh Moon, Seong-Jun Park, Changhee Lee

J Weld Join. 2024;42(2):200-205.

Research Papers A Study on the Microstructure and Mechanical Properties of Electron Beam Welds of SA508 Gr.3 Cl.1 steel with Different Heat Treatment conditions for Small Modular Reactor

In-Chul Jung, Heon-Min Suh, In-Sung Choi, Jeong Suh, Seong-Woo Jo, Deog-Nam Shim, Hyun-Uk Hong

J Weld Join. 2024;42(2):193-199.

Research Papers High-Speed Thermo-Compression Sinter-Bonding Properties in Air of a Paste Containing Dendritic Cu Particles Having Oxalate Skins

Horyun Kim, Jong-Hyun Lee

J Weld Join. 2024;42(2):184-192.

Research Papers Thermal Cycling Performance of Heterogeneous Solder Ball Joints with Sn-3.0Ag-0.5Cu and Sn-0.75Cu(-Ni,Bi) Solder Ball Composition for BGA Package

Joo Young Bae, Mi-Song Kim, So-Hee Hyun, Jong-Hyun Lee, Jeong Tak Moon, Young-Woo Lee, Seul Gi Lee, Hyeong-Tea Kim, Seung-Kwan Baek, Won Sik Hong

J Weld Join. 2024;42(2):174-183.

Research Papers Optimization of TLPS Bonding Process and Joint Property using Ni-Sn Paste for High Temperature Power Module Applications

Da-Gyeong Han, Dong-Hwan Lee, Jeong-Won Yoon

J Weld Join. 2024;42(2):165-173.

Research Papers Recent Progress of TGV Technology for High Performance Semiconductor Packaging

Beom Chang Seok, Jae Pil Jung

J Weld Join. 2024;42(2):155-164.

Research Papers Mechanical Bonding Properties of Solderable Anisotropic Polymer Composite containing Low-Melting-Point and High-Melting-Point Solder Fillers

Yi Hyeon Ha, Myeong Jin Jung, Jong-Moon Park, Sung Woo Choi, Jong-Min Kim, Byung-Seung Yim

J Weld Join. 2024;42(2):149-154.

Research Papers Prediction of Laser Welding Distortion in Cylindrical Shell Structures Using Direct Application of Inherent Strain

Ji-Hong Yoon, Young-Soo Yang, Sung-Hoon Kim, Se Hwan Lee, Jeong-Ung Park

J Weld Join. 2024;42(1):134-140.

Research Papers A Study on the Establishment of Alternative Verification Standard of Ballistic Ttest for Armored Steel Arc Welding Procedure

Yong Kim, Min Chul Oh, Ji Young Jang, Do Hui Kim

J Weld Join. 2024;42(1):125-133.

Research Papers Development of Creep and Mechanical Properties for SMAW Cr-Mo-X Steel Welds

Sanghyun Bae, Yongchul Kim, Stephen Liu

J Weld Join. 2024;42(1):117-124.

Research Papers A Study on the Weldability of Cylindrical Secondary Battery Material using Green Laser

Hyun Jong Yoo, Jun Su Park, Ik Geun Jeon, Myung Jin Kim, Jong Sik Kim, Hee Shin Kang

J Weld Join. 2024;42(1):106-116.

Research Papers Non-Destructive Testing of Laser Welded Hydrogen Storage Tank Liner Using Optical Coherence Tomography

Ryoonhan Kim, Dongsig Shin, Sujin Lee, Danbi Song, Sang-Eon Park, Wooyoung Chung, Sangbae Han

J Weld Join. 2024;42(1):99-105.

Research Papers Research Trends in the Directed Energy Deposition Method of Heterogeneous Materials

Raj Narayan Hajra, Jeoung Han Kim

J Weld Join. 2024;42(1):88-98.

Research Papers Assessment of Ttensile-Shear and T-Peel Strengths for Cu-STS 304 Dissimilar Overlap Welded Joints using Single-Mode Fiber Laser with High Welding Speeds

Youngjin Eun, Sanghoon Kang, Minjung Kang

J Weld Join. 2024;42(1):81-87.

Research Papers Review on Laser Welding Technology on Aluminum and Copper Dissimilar Materials for Secondary Batteries Assembly

Jaewoo Cho, Taehyun Lee, Heeseon Bang, Soongkeun Hyun, Cheolhee Kim

J Weld Join. 2024;42(1):69-80.

Research Papers A Study on Mechanical/Metallurgical Characteristic of Welded Joints According to Heat Input and Gap in Al/Cu Laser Welding

Chan Yang Lee, Min Chul Oh

J Weld Join. 2024;42(1):62-68.