Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 33(5); Oct 2015
Review Paper
2031706
Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry
Ashutosh Sharma, Y.S. Shin, Jae-Pil Jung
J Weld Join. 2015;33(5):1-8.   Published online October 30, 2015
PDFPDF    
Special Issues
2031707
UNS S32654 for Demanding Offshore Applications
Yong-Taek Shin
J Weld Join. 2015;33(5):9-13.   Published online October 30, 2015
PDFPDF    
2031708
Analysis of Adhesive Slag Formed on Weld Metal Surface of GTAW Welding after Flux Cored Multi-Pass Welding
Jung-Min Kim, Nam-Kyu Kim, Gi-Dong Kim, Ji-Hong Park
J Weld Join. 2015;33(5):14-19.   Published online October 30, 2015
PDFPDF    
2031709
Clad Steel for Application of Hull Structure
Yong-Taek Shin
J Weld Join. 2015;33(5):20-25.   Published online October 30, 2015
PDFPDF    
Research Papers
2031710
Fatigue Life of the Repair TIG Welded Hastelloy X Superalloy
Restu SIHOTANG, Sang-Kyu CHOI, Sung-Sang PARK, Eung-Ryul BAEK
J Weld Join. 2015;33(5):26-30.   Published online October 30, 2015
PDFPDF    
2031711
Microstructure and Mechanical Property in the Weld Heat-affected Zone of V-added Austenitic Fe-Mn-Al-C Low Density Steels
Joonoh Moon, Seong-Jun Park
J Weld Join. 2015;33(5):31-34.   Published online October 30, 2015
PDFPDF    
2031712
Effect of Groove Conditions on the Mechanical Properties of Welds Produced by the Combined Welding Process of Flux Cored Arc and Electro Gas in EH36 TMCP Steel Plate for Hull Structures
Kihyuk Kim, Kiwon Kim, Hoseop Sim, Kangho Bae, Hyunuk Hong, Byunggyu Park
J Weld Join. 2015;33(5):35-40.   Published online October 30, 2015
PDFPDF    
2031713
Evaluation Method for Snap Cure Behavior of Non-conductive Paste for Flip Chip Bonding
Kyung-Eun Min, Jun-Sik Lee, So-Jeong Lee, Sung Yi, Jun-Ki Kim
J Weld Join. 2015;33(5):41-46.   Published online October 30, 2015
PDFPDF    
2031714
Optimization of GTAW Parameters for Horizontal Welding of a STS316L Pipe
Hyoung-Keun Lee, Kyoung-Sik Bang
J Weld Join. 2015;33(5):47-52.   Published online October 30, 2015
PDFPDF    
2031715
Microstructure and Hardness of Yb:YAG Disc Laser Surface Overlap Melted Cold Die Steel, STD11
Kwang-Hyeon Lee, Seong-Won Choi, Jung Gil Yun, Myeong-Hwan Oh, Byung Min Kim, Chung-Yun Kang
J Weld Join. 2015;33(5):53-60.   Published online October 30, 2015
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2022 by The Korean Welding and Joining Society.

Developed in M2PI