2. S. S. Lee, T. H. Kim, S. J. Hu, W. W. Cai, and J. A. Abell,
Joining technologies for automotive lithium-ion battery manufacturing, A review, in ASME 2010 international manufacturing science and engineering conference. (2010) 541–549.
https://doi.org/10.1115/MSEC2010-34168
7. K. Lee. A study of ultrasonic welding mechanism and effect of welding parameters on aluminum sheet. Master degree thesis in Mechanical engineering. (2018), Seoul: Hanyang University.
11. M. M. Hailat, A. Mian, Z. A. Chaudhury, G. Newaz, R. Patwa, and H. J. Herfurth, Laser micro-welding of aluminum and copper with and without tin foil alloy,
Microsystem Technologies. (2012) 18 103–112.
https://doi.org/10.1007/s00542-011-1378-8
[CROSSREF]
16. L. Xi, M. Banu, S. J. Hu, W. Cai, and J. Abell, Performance prediction for ultrasonically welded dissimilar materials joints,
Journal of Manufacturing Science and Engi- neering. (2017) 139 011008.
https://doi.org/10.1115/1.4033692
[CROSSREF] [PDF]
20. S. S. Lee, T. H. Kim, S. J. Hu, W. W. Cai, J. A. Abell, and J. Li, Characterization of joint quality in ultrasonic welding of battery tabs,
Journal of Manufacturing Science and Engineering. (2013) 135 021004.
https://doi.org/10.1115/1.4023364
[CROSSREF] [PDF]
22. Y. Luo, H. Chung, W. Cai, T. Rinker, S. Jack Hu, E. Kannatey-Asibu, and J. Abell, Joint Formation in Multilayered Ultrasonic Welding of Ni-Coated Cu and the Effect of Preheating,
Journal of Manufacturing Science and Engineering. (2018) 140 111003.
https://doi.org/10.1115/1.4040878
[CROSSREF] [PDF]
23. S. S. Lee, T. H. Kim, S. J. Hu, W. W. Cai, and J. A. Abell, Analysis of weld formation in multilayer ultrasonic metal welding using high-speed images,
Journal of Manufacturing Science and Engineering. (2015) 137 031016.
https://doi.org/10.1115/1.4029787
[CROSSREF] [PDF]
24. S. S. Lee, C. Shao, T. H. Kim, S. J. Hu, E. Kannatey-Asibu, W. W. Cai, J. P. Spicer, and J. A. Abell, Charac- terization of ultrasonic metal welding by correlating online sensor signals with weld attributes,
Journal of Manufacturing Science and Engineering. (2014) 136(5) 051019.
https://doi.org/10.1115/1.4028059
[CROSSREF] [PDF]
25. S. J. Lee, H. Nakamura, Y. Kawahito, and S. Katayama, Effect of welding speed on microstructural and mechanical properties of laser lap weld joints in dissimilar Al and Cu sheets,
Science and Technology of Welding and Joining. (2014) 19(2) 111–118.
https://doi.org/10.1179/1362171813Y.0000000168
[CROSSREF]
29. B. Mehlmann, A. Olowinsky, M. Thuilot, and A. Gillner, Spatially modulated laser beam micro welding of CuSn6 and nickel-plated DC04 steel for battery applications,
Journal of Laser Micro Nanoengineering. (2014) 9(3) 276.
http://doi.org/10.2961/jlmn.2014.03.0019
[CROSSREF]
32. K. Shibata, T. Iwase, H. Sakamoto, F. H. Dausinger, B. Hohenberger, M. Mueller, A. Matsunawa, and N. Seto. Process stabilization by dual focus laser welding of aluminum alloys for car body
in Laser Processing of Advanced Materials and Laser Microtechnologies.
International Society for Optics and Photonics. (2003), Moscow: p. 376–385
https://doi.org/10.1117/12.515627
[CROSSREF]
38. P. Schmidt, M. Schweier, and M. Zaeh,
Joining of lithium-ion batteries using laser beam welding, electrical losses of welded aluminum and copper joints in Proceeding of 31st International Congress on Applications of Laser & Electro-Optics(ICALEO 2012, Tokyo). (2012) 915–923.
https://doi.org/10.2351/1.5062563