Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 A Study on the Optimum Line Heating Condition for Straightening a Thin Plate Welded Structure

Journal of KWJS 2011;29(2):40-45.
Published online May 7, 2011.
박판재 용접 구조물의 선상 가열 교정에서 최적 조건의 선정에 관한 연구
,
 
A Study on the Optimum Line Heating Condition for Straightening a Thin Plate Welded Structure
Jun-Hyoung Park, Jae-Woong Kim
Abstract
  The purpose of this study is to establish the optimum line heating condition to straighten the excessive bending distortion of a thin plate welded structure. For it, the extensive FEA and experiments were performed to evaluate the effect of heat source, heating speed and position on the straightening of a thin plate welded structure. In accordance with the results obtained by FEA and experiments, the straightening effect of line heating was strongly depends on the variables used in this study. With the results, the optimum line heating condition was established by using the response surface method and verified through comparing it with the numerical analysis result.
Key Words: : Line heating straightening, Sheet metal, Weld distortion, Numerical analysis, Finite element method(FEM), Optimal condition


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI