Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-12.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 A Study on the Welding Distortion Analysis According to Rib Height in Fillet Welding

J Weld Join > Volume 31(6); 2013 > Article
Journal of KWJS 2013;31(6):107-111.
DOI: https://doi.org/10.5781/KWJS.2013.31.6.107    Published online January 21, 2014.
A Study on the Welding Distortion Analysis According to Rib Height in Fillet Welding
Yong-Rae Kim*, Gyu-Yeong Song**, Chao Wang***, Jae-Woong Kim***
Correspondence:  Jae-Woong Kim,
Email: jaekim@ynu.ac.kr
Abstract
The welding distortion is caused by welding heat in the structures which are widely used in shipbuilding and automotive industries, thus many researchers have proposed such methods to control the welding distortion through trials and numerical studies. The welding distortion has been the main cause of low productivity due to the structural strength degradation, apparent flaw, additional deformation caused by the process followed the current assembly step, and the increase of correction workload. The deformation of fillet welding is investigated in this study, and the influence of the rib height on the welding distortion is verified through the actual experiment. And the numerical analysis model using the FE software MSC.marc for analysis of welding distortion is proposed.
Key Words: Welding distortion, Longitudinal bending, Angular distortion, Finite element analysis


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI