Volume 42 Issue 5

Research Papers Research on the Optimization of Oscillation for the Joint Quality of Laser Welded Joints in Automobile Seat Frames

JiYoung Shin, HyeonJe Kim, JaeYong Jang, HyeongJong Kim, Yeong-Do Park

J Weld Join. 2024;42(5):445-457.

Research Papers Revisiting the Concept of Property Optimization of Low Temperature Phase Transformed Microstructures of GIGASTEEL Welds

Gyuyeol Bae, Joonoh Moon, Bo-Young Jeong

J Weld Join. 2024;42(5):458-462.

Research Papers Evaluation of Secondary Buckling and Ultimate Strength Behaviour According to Boundary Conditions of Curved Plate Subjected to Compressive Load

Myung-Su Yi, Jae-Yong Ko, Joo-Shin Park

J Weld Join. 2024;42(5):463-471.

Research Papers Characteristics of Solidification Cracking for Ni-P Coated Cu-Al5052 Single-Mode Fiber Laser Welds

Ye-Ji Yoo, Eun-Joon Chun

J Weld Join. 2024;42(5):472-480.

Research Papers Evaluation of Quality for Flow Drill Screw (FDS) Joining Process Based on Loosening Torque

Tae-Jeong Kim, Se-Jin Ko, Wook-Jin Oh, Ji-Hong Lee

J Weld Join. 2024;42(5):481-486.

Research Papers A Primary Study on the Applicability of Gel-Type Filler Materials to Root Pass Welds of the Thick Plate

Young-Min Kim, Sangwoo Nam, Insung Hwang, Jason Cheon, Byeong-Jin Kim

J Weld Join. 2024;42(5):487-494.

Research Papers Analyzing the Influence of Welding Process Selection on Residual Stresses in Tube-to-Tubesheet Welded Joints

Manoj Kumar Jangid, Vikram Roy, M. T. Kamble, P. K. Singh

J Weld Join. 2024;42(5):495-513.

Research Papers Quality Classification of Multi-Layer Copper Foil Stacks Welds for Ultrasonic Welding Using CNN and RNN

Seon-myoung Hong, Jae-woo Cho, Hee-seon Bang

J Weld Join. 2024;42(5):514-520.

Research Papers Fracture Toughness Estimate of H-Section Steel for Offshore Structure

Gyubaek An, Jiseung Lee, Wonjun Jo, Chiung Sun, Jeongung Park

J Weld Join. 2024;42(5):521-529.

Research Papers Study on the Electron Beam Repair Welding of 5000 Aluminum Alloys

Insung Choi, Heon min Seo, In-Chul Jung, Jungsoo Choi, In-Duck Park, Jeong Suh

J Weld Join. 2024;42(5):530-538.

Research Papers A Study on the Effects of Offset and Welding Speed on Bead Shape and Welding Defects in the FCA Fillet Welding Process

Junsung Bae, Sang-Hyun Ahn, Gwang-Ho Jeong, Seonmin Kim, Dae-Won Cho, Seokyoung Ahn

J Weld Join. 2024;42(5):539-549.

Research Papers Enhancement in Mechanical Properties of AA5052 Sheet for Small Ship by Cold Roll-Bonding Process

Yu-Jong Roh, Hyeokjun Yang, Jun Yeong Jeong, Hyunkyoo Cho, Seong-Hee Lee

J Weld Join. 2024;42(5):550-559.

Research Papers Tensile Strength Property with PdCo-Cu Multi-Layer Lamination and Heat Treatment of MEMS Probe for Probe Card

So-Hee Hyun, Mi-Song Kim, Won Sik Hong, Jae-Hyung Lee, Tae-Jong Lee

J Weld Join. 2024;42(5):560-566.