Advanced Search  
JWJ > Volume 26(3); 2008 > Article
Journal of KWJS 2008 June;26(3) :37-44.
Published online July 31, 2008.
A Study on the Correlation between Advanced Small Punch Test and Charpy V-notch Test on X20CrMoV121 and 2.25Cr1Mo steels Weldment
Dong-Hwan Lee, Hyoung-Sup Kim

Correspondence:   Published online July 31, 2008
ABSTRACT
  Charpy V-Notch test is commonly used to evaluate fracture toughness. However, since the region to be evaluated is limited to bulk material due to the specimen size required, individual evaluation of microstructures on weldment is very difficult. In this study, ASP(Advanced Small Punch) test was carried out to evaluate material degradation and fracture toughness on the B.M, W.M and each micro-structures of HAZ for X20CrMoV121 and 2.25Cr1Mo steels with artificial aging time. In addition, to evaluate fracture toughness and material degradation of B.M and W.M of X20CrMoV121 steels with aging times, CVN (Charpy V-notch) test was performed. And then the correlation between ASP and CVN test on X20CrMoV121 steels was obtained. Furthermore, through this correlation, material degradation property of each microregion of the HAZ in weldment, which was impossible to be evaluated by the CVN test, can be estimated and determined.
Keywords: Advanced Small Punch (ASP) Test;Conventional Small Punch(CSP) Test;Material Degradation;Heat Affected Zone (HAZ);Ductile-Brittle Transition Temperature(DBTT)
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
1,064
View
0
Download
Related article
A Study on the Relation between Bcad Shape and Welding Parameters of CMA Welding for Die Remodeling  2002 June;20(3)
A Study on the Relation between Bcad Shape and Welding Parameters of CMA Welding for Die Remodeling  2002 June;20(3)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of KWJS for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of KWJS e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of KWJS e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
#304, San-Jeong Building,
23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society.           Developed in M2PI