Advanced Search  
JWJ > Volume 32(1); 2014 > Article
Journal of Welding and Joining 2014 February;32(1) :66-70.
Published online February 27, 2014.
doi:https://doi.org/10.5781/JWJ.2014.32.1.66
The Effect of Ti and Sn Contents on the Shear Bonding Strength of Brazing Joint of YSZ to STS430 using Ag Based Filler Metals
Ki Young Lee*, Hyun Gyoon Park*
*Department of Advanced Materials Engineering, Korea Polytechnic University, Siheung 429-793 Korea
Correspondence: Ki Young Lee  Email: vannis@naver.com
  Published online February 27, 2014
ABSTRACT
In Ti active brazing of YSZ to STS 430 using Ag-Cu Filler Metal, the effect of Ti contents on the shear bonding strength were investigated together with the effect of brazing temperature and holding time. The addition of Ti in Ag-Cu Filler Metal increased the bonding strength up to 4.68% Ti, followed by the decrease with further addition. This seems to be caused by formation of TixOy at the reaction layer. Brazing temperature was optimized at 960℃ among a given temperature ranges. The addion of Sn to Ag-Cu filler metal brought the decrease of its melting temperature its melting temperature without a significant decrease of bonging strength.
Keywords: Active Brazing | Reaction layer | YSZ | STS430 | Ag Filler Metal | SOFC
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
0
Crossref
1,010
View
6
Download
Related articles
The Effect of Environmental Test on the Shear Strength of the Ultrasonic bonded Cu Terminal for Power Module  2019 April;37(2)
The effects of brazing conditions on the bond strength of the SiC / SiC and SiC / mild steel joints brazed by Ag-Ti based alloys   1997 October;15(5)
Effect of Sn and P on the Shear Strength of Copper to Stainless Steel Brazed Joint   1989 September;7(3)
The Effect of Environmental Test on the Shear Strength of the Ultrasonic bonded Cu Terminal for Power Module  2019 April;37(2)
The effects of brazing conditions on the bond strength of the SiC / SiC and SiC / mild steel joints brazed by Ag-Ti based alloys   1997 October;15(5)
Effect of Sn and P on the Shear Strength of Copper to Stainless Steel Brazed Joint   1989 September;7(3)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
The Korea Science and Technology Building, New B/D, Room 503
Teheran-ro 7-gil, 22(635-4, Yeoksam-Dong), Gangnam-gu, Seoul 06130, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.