1. N. P. Lutsey, Review of technical literature and trends related to automobile mass-reduction technology, Institute of Transportation Studies. (2010)
3. T. Inaba, K. Tokuda, H. Yamashita, Y. Takebayashi, T. Minoura, and S. Sasabe, Wrought aluminum technologies for automobiles, Kobelco Technology Review. 26 (2005) 55–62.
9. A. Kumar and M. S. Milton, A Comparison of welding techniques of aluminium alloys, A literature review, International Journal of Scientific Research in Science, Engineering and Technology. 2(3) (2016) 172–175.
10. R. Rajan, P. Kah, B. Mvola, and J. Martikainen, Trends in aluminium alloy development and their joining methods, Reviews on Advanced Materials Science. 44(4) (2016) 383–397.
11. P. B. Srinivasan, W. Dietzel, R. Zettler, J. Dos Santos, and V. Sivan, Stress corrosion cracking susceptibility of friction stir welded AA7075–AA6056 dissimilar joint,
Materials Science and Engineering, A. 392(1) (2005) 292–300.
https://doi.org/10.1016/j.msea.2004.09.065
[CROSSREF]
12. V. Balasubramanian, V. Ravisankar, and G. M. Reddy, Effect of pulsed current and post weld aging treatment on tensile properties of argon arc welded high strength aluminium alloy,
Materials Science and Engineering, A. 459(1–2) (2007) 19–34.
https://doi.org/10.1016/j.msea.2006.12.125
[CROSSREF]
13. P. Cavaliere, R. Nobile, F. Panella, and A. Squillace, Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir welding,
International Journal of Machine Tools and Manufacture. 46(6) (2006) 588–594.
https://doi.org/10.1016/j.ijmachtools.2005.07.010
[CROSSREF]
14. Y. Chao, Y. Wang, and K. Miller, Effect of friction stir welding on dynamic properties of AA2024-T3 and AA7075- T7351, Welding journal. 80(8) (2001) 196–200.
16. A. Da Silva, E. Arruti, G. Janeiro, E. Aldanondo, P. Alvarez, and A. Echeverria, Material flow and mechanical behaviour of dissimilar AA2024-T3 and AA7075- T6 aluminium alloys friction stir welds,
Materials & Design. 32(4) (2011) 2021–2027.
https://doi.org/10.1016/j.matdes.2010.11.059
[CROSSREF]
19. B. Hu and I. M. Richardson, Mechanism and possible solution for transverse solidification cracking in laser welding of high strength aluminium alloys,
Materials Science and Engineering, A. 429(1–2) (2006) 287–294.
https://doi.org//10.1016/j.msea.2006.05.040
[CROSSREF]
26. A. Paleocrassas and J. Tu, Low-speed laser welding of aluminum alloy 7075-T6 using a 300-W, single-mode, ytterbium fiber laser, Welding Journal-New York. 86(6) (2007) 179–186.
29. S. Rajakumar, C. Muralidharan, and V. Balasubramanian, Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075-T6 aluminium alloy,
Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. 224(8) (2010) 1175–1191.
https://doi.org/10.1243/09544054JEM1802
[CROSSREF]
30. S. Rajakumar, C. Muralidharan, and V. Balasubramanian, Influence of friction stir welding process and tool parameters on strength properties of AA7075-T6 aluminium alloy joints,
Materials & Design. 32(2) (2011) 535–549.
https://doi.org/10.1016/j.matdes.2010.08.025
[CROSSREF]
31. B. Ravindra, T. S. Kumar, and V. Balasubramanian, Fatigue life prediction of gas metal arc welded crucifrom joints of AA7075 aluminium alloy failing from root region,
Transactions of Nonferrous Metals Society of China. 21(6) (2011) 1210–1217.
https://doi.org/10.1016/S1003-6326(11)60844-3
[CROSSREF]
33. M. Sivashanmugam, T. Kumar, C. J. Shanmugam, and M. Sathishkumar, Investigation of microstructure and mechanical properties of GTAW and GMAW joints on AA7075 aluminum alloy,
Frontiers in Automobile and Mechanical Engineering. (2010) 241–246.
https://doi.org/10.1109/FAME.2010.5714843
[CROSSREF]
35. M. Temmar, M. Hadji, and T. Sahraoui, Effect of post-weld aging treatment on mechanical properties of tungsten inert gas welded low thickness 7075 aluminium alloy joints,
Materials & Design. 32(6) (2011) 3532–3536.
https://doi.org/10.1016/j.matdes.2011.02.011
[CROSSREF]