| [연구논문]천이액상확산접합에 의한 합금공구강의 접합특성 |
|
, , , , , |
| |
| Joinability of Tool Steels by TLP Bonding |
|
Byung-Dae Kwon, Won-Bae Lee, Bong-Soo Kim, Tae-Whan Hong, Chang-Chae Shur, Seung-Boo Jung |
|
|
| Abstract |
|
The mechanical properties of STD11 joints by using TLP (Transient Liquid Phase Diffusion) bonding method employing MBF-30 and MBF-80 insert metals were investigated with concerning to the microstructural change. TLP bonding of STD 11 was carried out at 1323~1423K for 0.6ks~3.6ks in vacuum.
The microstructure and the element distribution of the interlayer between tool steels and insert metals showed specific feature with bonding conditions. It was found that the width of the interlayer increased at initial bonding stage. However, the width of interlayer showed nearly constant value during the isothermal solidification. After isothermal solidification was completed, the joint showed homogeneous element distribution and similar microstructure with base metal because of the grain boundary migration to the bonded interlayer.
The bonding strength measured by a tensile test has been varied with the bonding conditions. The maximum joint strength, 760MPa, was obtained with the condition of 1423K for 1.2ks using MBF30 insert metal in this experiment. |
|
PDF Links
Full text via DOI
Download Citation
