1. S. Matsuoka, K. Hasegawa, and Y. Tanaka, Newly-developed ultra-high tensile strength steels with excellent formability and weldability, JFE Tech. Rep. 10 (2007) 13–18.
2. S. S. Park, Y. M. Choi, D. G. Nam, Y -S. Kim, J. H. Yu, and Y. D. Park, Evaluation of resistance spot weld interfacial fractures in tensile-shear tests of TRIP 1180 steels,
J. Korean Weld. Join. Soc. 26(6) (2008) 81–91.
https://doi.org/10.5781/KWJS.2008.26.6.081
[CROSSREF]
3. Y. Toji, H. Matsuda, M. Herbig, P. P. Choi, and D. Raabe, Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy,
Acta Mater. 65 (2014) 215–228.
https://doi.org/10.1016/j.actamat.2013.10.064
[CROSSREF]
4. E. Billur and T. Altan, Three generations of advanced high-strength steels for automotive applications, Part III, Stamp. J. (2014) 12–13.
5. S. Yan, X. Liu, W. J. Liu, T. Liang, B. Zhang, L. Liu, and Y. Zhao, Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q&P) processes after a full and intercritical austenitization,
Mater. Sci. Eng. A. 684 (2017) 261–269.
https://doi.org/10.1016/j.msea.2016.12.026
[CROSSREF]
7. H. S. Zhao, X. Zhu, W. Li, X. J. Jin, L. Wang, H. Jiao, and D. M. Jiang, Austenite stability for quenching and partitioning treated steel revealed by colour tint-etching method,
Mater. Sci. Technol. 30(9) (2014) 1008–1013.
https://doi.org/10.1179/1743284714Y.0000000517
[CROSSREF]
9. H. You, M. Kang, S. Yi, S. Hyun, and C. Kim, Mode- ling of Laser Welds Using Machine Learning Algorithm Part II, Geometry and Mechanical Behaviors of Laser Overlap Welded High Strength Steel Sheets,
J. Weld. Join. 39(1) (2021) 36–44.
https://doi.org/10.5781/JWJ.2021.39.1.4
[CROSSREF]
11. M. Kang, W. S. Choi, and S. Kang, Ultrasonic and Laser Welding Technologies on Al/Cu Dissimilar Materials for the Lithium-Ion Battery Cell or Module Manufacturing,
J. Weld. Join. 37(2) (2019) 52–59.
https://doi.org/10.5781/JWJ.2019.37.2.8
[CROSSREF]
12. A. Nagasaka, Y. Kubota, K. I. Sugimoto, A. Mio, T. Hojo, K. Makii, M. Kawajiri, and M. Kitayama, Effect of YAG laser cutting on stretch-flangeability of ultra high strength TRIP sheet steel with bainitic ferrite matrix,
ISIJ Int. 50(10) (2010) 1441–1446.
https://doi.org/10.2355/isijinternational.50.1441
[CROSSREF]
14. J. J. Guzman-Aguilera, C. J. Martinez-Gonzalez, V. H. Baltazar-Hernandez, S. Basak, S. K. Panda, M. H. Razmpoosh, A. Gerlich, and Y. Zhou, Influence of SC- HAZ microstructure on the mechanical behavior of Si-TRIP steel welds,
Mater. Sci. Eng. A. 718 (2018) 216–227.
https://doi.org/10.1016/j.msea.2018.01.108
[CROSSREF]
15. S. Panda, N. Sreenivasan, M. Kuntz, and Y. Zhou, Numerical simulations and experimental results of tensile test behavior of laser butt welded DP980 steels,
J. Eng. Mater. Technol. 130(4) (2008) 041003
https://doi.org/10.1115/1.2969256
[CROSSREF]
16. B. Zhang, Y. Dong, Y. Du, R. D. K. Misra, H. Y. Wu, X. N. Wang, W. Z. Zhao, and L. X. Du, Microstructure and formability performance of fiber laser welded 1.2 GPa grade hot-rolled TRIP steel joints,
Opt. Laser Technol. 143 (2021) 107341
https://doi.org/10.1016/j.optlastec.2021.107341
[CROSSREF]