4. K. Hwang, Y. -S. Jung, Y. -J. Heo, F. H. Scholes, S. E. Watkins, J. Subbiah, D. J. Jones, D. -Y. Kim, and D. Vak, Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells,
Adv. Mater. 27 (2015) 1241–1247.
https://doi.org/10.1002/adma.201404598
[CROSSREF] [PUBMED]
5. C. H. Kim, J. Jo, and S. -H. Lee, “Design of Roll-to-Roll Printing Equipment with Multiple Printing Methods for Multi-Layer Printing”,
Rev. Sci. Instrum. 82 (2012) 065001.
https://doi.org/10.1063/1.4726018
[CROSSREF]
6. A. Rida, L. Yang, R. Vyas, and M. M. Tentzeris, Conductive Inkjet-Printed Antennas on Flexible Low-Cost Paper-Based Substrates for RFID and WSN Applications,
IEEE Antennas Propag. Mag. 51 (2009) 13–23.
https://doi.org/10.1109/MAP.2009.5251188
[CROSSREF]
8. A. L. Dearden, P. J. Smith, D.Y. Shin, N. Reis, B. Derby, and P. O'brien, A Low Curing Temperature Silver Ink for Use in Ink-Jet Printing and Subsequent Production of Conductive Tracks,
Macromol. Rapid Commun. 26 (2005) 315–318.
https://doi.org/10.1002/marc.200400445
[CROSSREF]
9. K. -S. Kim, J. -M. Koo, J. -W. Joung, B. -S. Kim, and S. -B. Jung, Electrical Characteristics of Copper Circuit Using Inkjet Printing, J. Microelectron. Packag. Soc. 17(3) (2010) 43–49.
10. S. H. Ko, H. Pan, C. P. Grigoropoulos, C. K. Luscombe, J. M. J. Frechet, and D. Poulikakos, All-Inkjet-Printed Flexible Electronics Fabrication on a Polymer Substrate by Low-Temperature High-Resolution Selective Laser Sintering of Metal Nanoparticles,
Nanotechnology. 18 (2007) 345202.
https://doi.org/10.1088/0957-4484/18/34/345202
[CROSSREF]
11. J. Perelaer, R. Abbel, S. Wunscher, R. Jani, T. V. Lammeren, and U. S. schbert, Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure, From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds. Adv, Mater, 24 (2012) 2620–2625.
https://doi.org/10.1002/adma.201104417
[CROSSREF] [PUBMED]
12. D. Angmo, T. T. Larsen-Olsen, M. Jorgensen, R. R. Sondergaard, and F. C. Krebs, Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration,
Adv. Energy Mater. 3 (2013) 172–175.
https://doi.org/10.1002/aenm.201200520
[CROSSREF]
13. T. Araki, T. Sugahara, J. Jiu, S. Nagao, M. Nogi, H. Koga, H. Uchida, K. Shinozaki, and K. Suganuma, Cu Salt Ink Formulation for Printed Electronics Using Photonic Sintering,
Langmuir. 29(35) (2013) 11192–11197.
https://doi.org/10.1021/la402026r
[CROSSREF] [PUBMED]
15. R. Abbel, T. V. Lammeren, R. Hendriks, J. Ploegmakers, E. J. Rubingh, E. R. Meinders, and W. A. Groen, Photonic Flash Sintering of Silver Nanoparticle Inks, A Fast and Convenient Method for the Preparation of Highly Con- ductive Structures on Foil,
MRS Cummun. 2 (2012) 145–150.
https://doi.org/10.1557/mrc.2012.28
[CROSSREF]
16. Y. Gao, C. Zou, B. Yang, Q. Zhai, J. Liu, E. Zhuravlev, and C. Schick, Nanoparticles of SnAgCu Lead-Free Solder Alloy with an Equivalent Melting Temperature of SnPb Solder Alloy,
J. Alloy Compd. 484(1-2) (2009) 777–781.
https://doi.org/10.1016/j.jallcom.2009.05.042
[CROSSREF]
17. J. Zhao, Y. Gao, W. Zhang, T. Song, and Q. Zhai, Observation of the Solidification Microstructure of Sn3.5Ag Droplets Prepared by CDCA Technique,
J. Mater. Sci. Mater. Electron. 23(12) (2012) 2221–2228.
https://doi.org/10.1007/s10854-012-0766-x
[CROSSREF]