JWJ > Volume 31(2); 2013 > Article
Journal of KWJS 2013 April;31(2) :21-25.
Published online June 5, 2013.
doi:https://doi.org/10.5781/KWJS.2013.31.2.21
Researches in Corrosion Resistance of Friction Stir Welded Aluminum alloys
Byung-Wook Ahn, Don-Hyun Choi, Yun-Mo Yeon, Seung-Boo Jung
Department of Advanced Materials Application, Suwon Science College
MEPL, Sungkyunkwan University
School of Advanced Materials Science and Engineering, Sungkyunkwan University
Correspondence: Seung-Boo Jung  Email: sbjung@skku.edu
  Published online June 5, 2013
ABSTRACT
Aluminum alloys have been considered for substantial use in these industries. This ensues from their attractive strength to weight ratio, superb formability, apposite weldability and acceptable corrosion resistance. Depending on the specific application, corrosion behavior is a significant factor of a welded joint. In this study, recent researches in the view of corrosion resistance of friction stir welded aluminum alloys are briefly reviewed.
Keywords: Friction stir welding | Aluminum alloy | Corrosion resistance
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
0
Crossref
976
View
4
Download
Related articles
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium   2017 August;35(4)
Recent R&D status on friction stir welding of Ti and its alloys  2015 April;33(2)
Application of Friction Stir Welding Processes for Aluminum alloy Boat  2012 April;30(2)
Influence of Welding Parameters on Macrostructure and Mechanical Properties of Friction-Stir-Spot-Welded 5454-O Aluminum Alloy Sheets  2011 December;29(6)
The Effect of Welding Condition on Tensile Properties of Friction Stir Welds of KS5J32 Al Alloy  2011 October;29(5)
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium   2017 August;35(4)
Recent R&D status on friction stir welding of Ti and its alloys  2015 April;33(2)
Application of Friction Stir Welding Processes for Aluminum alloy Boat  2012 April;30(2)
Influence of Welding Parameters on Macrostructure and Mechanical Properties of Friction-Stir-Spot-Welded 5454-O Aluminum Alloy Sheets  2011 December;29(6)
The Effect of Welding Condition on Tensile Properties of Friction Stir Welds of KS5J32 Al Alloy  2011 October;29(5)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of KWJS for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of KWJS e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of KWJS e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
The Korea Science and Technology Building, New B/D, Room 503
Teheran-ro 7-gil, 22(635-4, Yeoksam-Dong), Gangnam-gu, Seoul 06130, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.