Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Brazing Process of Stainless Steel

Journal of KWJS 2011;29(6):40-44.
Published online January 20, 2012.
스테인리스강의 브레이징 특성
, , , , ,
 
Brazing Process of Stainless Steel
SungChul Hong, JunKyu Park, JooHee Oh, JaeHoon Lee, Wonjoong Kim, JaePil Jung
Abstract
  Brazing of a stainless steel was described in this article. Brazing is a joining technology without melting a substrate and joining temperature is higher than 450 ℃. Brazing can be broadly applicable across industries. In particular, brazing of stainless steel is widely used in aircraft parts, car engines, heat exchangers, etc. due to its excellent strength, corrosion resistance and other suitable characteristics. Characteristics of the stainless steel depend on their classification like austenitic, ferritic and martensitic stainless steels. In addition, there are many processes in brazing and various parameters such as brazing heat source, filler metals, joint design, etc. Therefore, it is necessary to know basic knowledge about brazing to achieve good brazing joint. Accordingly, properties of stainless steel and design of brazing joint and related process were described in this article.
Key Words: Stainless steel, Brazing, Nickel brazing, Furnace brazing, Filler metal


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI