Previous issues
Volume 18 Issue 3
-
Design of Brazing Joints(Ⅱ) - Design of Joint Clearance -
- 강정윤
- Journal of KWJS. 2000;18(3):1-4.
-
Current Status of Tailored Blank Technology
- 이종봉, 박희동
- Journal of KWJS. 2000;18(3):5-11.
-
Welding Technology for Tailored Blank Manufacturing
- 김기철, 김재웅
- Journal of KWJS. 2000;18(3):12-19.
-
Welding Systems for Tailored Blank Manufacturing
- 최이천, 오영근
- Journal of KWJS. 2000;18(3):20-24.
-
Comparison of Characteristics of Mash Seam Welding and Laser Welding Tailored Blank
- 최정영, 이창희
- Journal of KWJS. 2000;18(3):25-31.
-
Quality Monitoring System for Tailored Blank Welding
- 이경돈
- Journal of KWJS. 2000;18(3):32-40.
-
Forming Technology of Tailroad Blanks
- 박기철
- Journal of KWJS. 2000;18(3):41-50.
-
A study on the Erosion Behavior of the Ceramic Sprayed Coating Layer in the Molton 55% Al-Zn
- 강태영, 임병문, 최장현, 김영식
- Journal of KWJS. 2000;18(3):51-59.
-
A Study on the Image Processing of Visual Sensor for Weld Seam Tracking in GMA Welding
- 정규철, 김재웅
- Journal of KWJS. 2000;18(3):60-67.
-
An Experimental Study on Allowable Size of Incomplete Penetration in Butt Joint Bridge Weld Considering Fatigue Strength
- 백영남, 장영권
- Journal of KWJS. 2000;18(3):68-75.
-
A Study on the Three-Deimensional Heat Flow Analysis in the Laser Welding for Deep Penetration
- 이규태, 김재웅
- Journal of KWJS. 2000;18(3):76-82.
-
Nd:YAG Laser Cladding of Inconel with Wire Feeding
- 김재도, 배민종, 팽윤
- Journal of KWJS. 2000;18(3):83-88.
-
Reliability of Fine Pitch Solder Joint with Sn-3.5wt%Ag Lead-Free Solder
- 하범용, 이준환, 신영의, 정재필, 한현주
- Journal of KWJS. 2000;18(3):89-96.
-
A Study on Corrosion Failure of a Weathering Steel Weldment with Various Applied Potentials in Acid-chloride Solution
- 최윤석, 김정구, 김종집, 이병훈
- Journal of KWJS. 2000;18(3):97-105.
-
High Temperature Tensile Property of Transient Liquid Phase Bonded Joints of Ni-base Single Crystal Superalloy
- 김대업, 강정윤
- Journal of KWJS. 2000;18(3):106-113.
-
Real Time Quality Assurance with a Pattern Recognition Algorithm during Resistance Spot Welding
- 조용준, 이세헌
- Journal of KWJS. 2000;18(3):114-121.
-
Design of Plasma Cutting Torch by Tolerance Propagation Analysis
- 방용우, 최덕준, 장희석, 양진승
- Journal of KWJS. 2000;18(3):122-130.