Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 The Effects of Welding Length on the Angular Distortion

Journal of KWJS 2005;23(4):48-52.
Published online September 22, 2005.
[연구논문]용접각변형에 미치는 용접길이의 영향
,
 
The Effects of Welding Length on the Angular Distortion
Jeong-Ung Park, Hae-Woo Lee
Abstract
To estimate welding deformation for large steel structures, either experiment result with small specimen or analysis result of FEM with small numerical model in used. Consequently, it is important to decide the welding length of specimen and numerical model not to have an effect on welding deformation for accurate estimation of whole welding deformation. This study experimentally clarifies the effect of welding length on angular distortion due to welding by varying welding length of specimens, but fixing width and thickness of specimens on V-groove butt welding, fillet welding and bead on plate welding. As a result, the critical welding length on fillet welding and on bead on plate welding is over 500㎜ and on V-groove butt welding is over 1,000㎜.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI