Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-12.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 The Thermal Fatigue Analysis and Life Evaluation of Solder Joint for Flip Chip Package using Darveaux Model

Journal of KWJS 2004;22(6):36-42.
Published online January 26, 2005.
[연구논문] Darveaux 모델에 의한 플립칩 패키지 솔더 접합부의 열피로 해석 및 수명 평가
, , ,
 
The Thermal Fatigue Analysis and Life Evaluation of Solder Joint for Flip Chip Package using Darveaux Model
Young-Eui Shin, Yeon-Sung Kim, Jong-Min Kim, Myun-Gi Choi
Abstract
Experimental and numerical approaches on the thermal fatigue for the solder joint of flip chip package are discussed, However, it is one of the most difficult problems to choose the proper fatigue model. It was found that viscoplstie FE model with Darveaux method was very desirable and useful to predict the thermal fatigue life of solder joint for flip chip package under 208~423K thermal cycling condition such as steep slope of temperature(JEDEC standard condition C), Thermal fatigue life was 1075 cycles as a result of viscoplatie model. It was a good agreement compared to the experimental. And also, it was found from the experimental that probability of the thermal fatigue life was 60% at 1500 cycles.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI