2. D. H. Lee, N. K. Ku, T. W. Kim, J. W. Kim, K. Y. Lee, and Y. S. Son, Development and application of an intelligent welding robot system for shipbuilding,
Robot. Comput. Integr. Manuf. 27(2) (2011) 377–388.
https://doi.org/10.1016/j.rcim.2010.08.006
[CROSSREF]
6. T. N. Wordofa, J. R. Perumalla, and A. Sharma, An artificial intelligence system for quality level-based prediction of welding parameters for robotic gas metal arc welding,
Int. J. Adv. Manuf. Technol. 132 (2024) 3193–3212.
https://doi.org/10.1007/s00170-024-13518-7
[CROSSREF]
7. F. Xu, L. He, Z. Hou, T. Zuo, J. Li, S. Jin, Q. Wang, and H. Zhang, Online welding status monitoring method of T-joint double-sided double arc welding based on multi-source information fusion,
J. Manuf. Process. 124 (2024) 1485–1505.
https://doi.org/10.1016/j.jmapro.2024.06.059
[CROSSREF]
8. S. B. Jang, W. J. Lee, Y. Jeong, Y. Wang, C. H. Won, J. W. Lee, and J. H. Yoon, Machine learning-based weld porosity detection using frequency analysis of arc sound in the pulsed gas tungsten arc welding process,
J. Adv. Join. Process. 10 (2024) 100231.
https://doi.org/10.1016/j.jajp.2024.100231
[CROSSREF]
10. L. A. S. Rodrigues, C. R. Loayza. L, D. J. A. Borges, P. E. C. Baia, E. N. Freitas, and E. M. Braga, Welding procedures influence analysis on the residual stress distribution and distortion of stiffened panels welded via robotized FCAW,
Thin-Walled Struct. 141 (2019) 175–183.
https://doi.org/10.1016/j.tws.2019.03.055
[CROSSREF]
11. D. W. Cho, S. J. Na, and M. Y. Lee, Expectation of bead shape using non-linear multiple regression and piecewise cubic Hermite interpolation in FCA fillet pipe welding,
J. Weld. Join. 27(5) (2009) 42–48.
https://doi.org/10.5781/KWJS.2009.27.5.042
[CROSSREF]
12. M. Ivanov, A. Cherniavsky, A. Tingaev, Y. Bezgans, D. Derbenev, N. Shaburova, I. Suleymanova, A. Alrukhaymi, and T. Sonar, Experimental and numerical investigation on cold cracking susceptibility of naval grade high strength steel welds for lightweight shipbuilding structures,
Int. J. Lightweight Mater. Manuf. 7(4) (2024) 597–613.
https://doi.org/10.1016/j.ijlmm.2024.03.004
[CROSSREF]
15. S. H. Ahn, J. S. Bae, D. W. Cho, D. H. Kim, S. H. Bae, S. Kim, J. Kang, T. K. Park, C. W. Park, J. G. Park, and D. J. Choi, A Study on Changes of Bead Shape and Metal Transfer Mode Affected by Molten Pool Behavior for Welding Position in GMAW Process,
J. Weld. Join. 41(4) (2023) 244–253.
https://doi.org/10.5781/JWJ.2023.41.4.3
[CROSSREF]
16. S. H. Ahn, J. S. Bae, D. W. Cho, and Y. W. Park, Analysis of melting-to-solidification flow patterns with changes in depositional position during the wire-arc direct energy deposition process,
Int. J. Adv. Manuf. Technol. 134 (2024) 2179–2198.
https://doi.org/10.1007/s00170-024-14236-w
[CROSSREF]
21. H. J. Song, S. K. Lee, Y. H. Kang, and S. J. Na, A Study on Seam Tracking and Weld Defects Detecting for Automated Pipe Welding by Using Double Vision Sensors, J. Korean Weld. Join. Soc. 21(1) (2003) 60–65.
22. ISO 5817,Welding-Fusion welded joints in steel, nickel, titanium and their alloys (beam welding excluded)- Quality levels for imperfection, International Oragnization Standard (ISO). (2014)