1. IMO. The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code), Imternational Maritime Organizqation Resolution MSC. 370(93) (2014)
2. LR. Fatigue assessment of ship units adopting IMO Type B independent tanks constructed primarily of plane surfaces for the storage of liquefied gases, Lloyd's Register ShipRight Design and construction. (2014)
3. DNV GL, Liquefied gas carriers with spherical tanks of type B, DNV GL DNVGL-CG-0134. (2018)
4. Y. Nagata, IHI-SPB Tank for LNG-Fueled Ship, IHI Engineering Review. 2 (2015)
6. J. A. Newman, The Effects of Load Ratio on Threshold Fatigue Crack Growth of Aluminum Alloys, Virginiatech Doctor Dissertation. (2000)
7. BS7910. Guide to methods for assessing the acceptability of flaws in metallic structures, British Standards. (2013)
8. J. C. Newman Jr and I. S. Faju, Analyses of surface cracks in finite plates under tension or bending loads, NASA Technical Report. 1578 (1979)
10. K. Walker, The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum,
ASTM STP462. (1970)
[CROSSREF]
11. E. D. Eason, J. D. Gilman, D. P. Jones, and S. P. Andrew, Technical basis for a revised fatigue crack growth rate reference curve for ferritic steels in air,
J. Press. Vessel Technol. 114 (1992) 80–86.
https://doi.org/10.1115/1.2929016
[CROSSREF]
12. M. Kurihara, A. Katoh, and M. Kawahara, Effects of stress ratio and step loading on fatigue crack propagation rate, Soc. Mater. Sci. 1 (1985) 217–233.
14. A. J. McEvily and J. Gregor, On the threshold for fatigue-crack growth,
4th International Conference of Fracture, Waterloo. 2 (1977) 1293–1298.
[CROSSREF]
15. N. E. Dowling, Mechanical Behavior of Materials, Pearson. (2013) 574–581.
18. M. S. Lee and M. H. Kim, Fatigue crack growth model considering underload history for storm loads, Int. J. Naval Archt. Ocean Eng.(under review for publish). (2022)
20. Hyundai Heavy Industries. Hyundai Heavy Industries Quality Manual, Hyundai Heavy Industries. (2020)
21. IIW-XIII-1235-87, A Review of Japanese Research into the Fatigue of A5083 Alloy Construction for LNG Spherical Tanks, IIW. (1987) 1–38.
22. BS8118, Structural use of aluminum, British Standards. (1991)
23. H. Tada, P. C. Paris, and G. Irwin, The analysis of cracks handbook, ASME Press. (2000)
26. R. I. Stephens, D. K. Chen, and B. W. Hom, Fatigue crack growth with negative stress ratio following single overloads in 2024-T3 and 7075-T6 aluminium alloys,
ASTM STP. 595 (1976) 172–183.
https://doi.org/10.1520/stp33361s
[CROSSREF]
27. D. S. Dawicke, Overload and underload effects on the fatigue crack growth behavior of the 2024-T3 aluminum alloy, NASA CR-201668. (1997)