1. Korean Welding and Joining Society. Welding and Joining Handbook, 1:Ferrous and Non-Ferrous Materials. Korean Welding and Joining Society, Daejeon, Korea. (2008)
3. J. L. Murray, Phase Diagrams of Binary Titanium Alloys, ASM Int. (1987)
7. Y. Gao, T. Tsumura, and K. Nakata, Dissimilar Welding of Titanium Alloys to Steels, Trans. JWRI. 41(2) (2012) 7–12.
8. Korean Welding and Joining Society. Welding and Joining Handbook, 3:Process and Thermal Processing, Korean Welding and Joining Society , Daejeon, Korea. (2008)
9. M. Ghosh and S. Chatterjee, Characterization of Transition Joints of Commercially Pure Titanium to 304 Stainless Steel,
Mater. Charact. 48(5) (2002) 393–399.
[CROSSREF]
15. S. Kundu, M. Ghosh, A. Laik, K. Bhanumurthy, G. B. Kale, and S. Chatterjee, Diffusion Bonding of Com- mercially Pure Titanium to 304 Stainless Steel Using Copper Interlayer,
Mater. Sci. Eng. A 407(1-2) (2005) 154–160.
https://doi.org/10.1016/j.msea.2005.07.010
[CROSSREF]
17. S. Kundu, B. Mishra, D. L. Olson, and S. Chatterjee, Interfacial Reactions and Strength Properties of Diffusion Bonded Joints of Ti64 Alloy and 17-4PH Stainless Steel Using Nickel Alloy Interlayer,
Mater. Des. 51 (2013) 714–722.
https://doi.org/10.1016/j.matdes.2013.04.088
[CROSSREF]
20. P. Camargo, R. Trevisan, and S. Liu, Microstructural Characterization of Titanium to 304 Stainless Steel Brazed Joints, Weld. J. 72(12) (1993) 537
21. C. Liu, C. Ou, and R. Shiue, The Microstructural Obser- vation and Wettability Study of Brazing Ti-6al-4v and 304 Stainless Steel Using Three Braze Alloys,
J. Mmater. Sci. 37(11) (2002) 2225–2235.
https://doi.org/10.1023/A:1015356930476
[CROSSREF]
23. X. Yue, P. He, J. C. Feng, J. H. Zhang, and F. Q. Zhu, Microstructure and Interfacial Reactions of Vacuum Brazing Titanium Alloy to Stainless Steel Using an AgCuTi Filler Metal,
Mater. Charact. 59(12) (2008) 1721–1727.
https://doi.org/10.1016/j.matchar.2008.03.014
[CROSSREF]
29. H. Hiraga, K. Fukatsu, K. Ogawa, M. Nakayama, and Y. Muto, Nd:YAG Laser Welding of Pure Titanium to Stainless Steel,
Weld. Int. 16(8) (2002) 623–631.
[CROSSREF]
35. Y. Zhang, J. Zhou, D. Sun, and X. Gu, Nd:Yag Laser Welding of Dissimilar Metals of Titanium Alloy to Stainless Steel without Filler Metal Based on a Hybrid Connection Mechanism,
J. Mater. Res. Technol. 9(2) (2019) 1662–1672.
https://doi.org/10.1016/j.jmrt.2019.12.001
[CROSSREF]
38. I. Mitelea, C. Groza, and C. Craciunescu, Copper In- terlayer Contribution on Nd:Yag Laser Welding of Dissimilar Ti-6al-4v Alloy with X5CrNi18-10 Steel,
J. Mater. Eng. Perform. 22(8) (2013) 2219–2223.
https://doi.org/10.1007/s11665-013-0507-1
[CROSSREF]
39. I. Tomashchuk, P. Sallamand, N. Belyavina, and M. Pilloz, Evolution of Microstructures and Mechanical Properties During Dissimilar Electron Beam Welding of Titanium Alloy to Stainless Steel Via Copper Interlayer,
Mater. Sci. Eng. A 585 (2013) 114–122.
https://doi.org/10.1016/j.msea.2013.07.050
[CROSSREF]
40. A. N. Cherepanov, A. M. Orishich, and V. I. Mali, Laser Welding of Stainless Steel with a Titanium Alloy with the Use of a Multilayer Insert Obtained in an Explosion,
Combust. Explos. Shock Waves. 50(4) (2014) 483–487.
https://doi.org/10.1134/s0010508214040182
[CROSSREF]
42. N. B. Pugacheva, M. V. Myasnikova, and N. S. Michurov, Simulation of the Elastic Deformation of Laser-Welded Joints of an Austenitic Corrosion-Resistant Steel and a Titanium Alloy with an Intermediate Copper Insert,
Phy. Met. Metallogr. 117(2) (2016) 195–203.
https://doi.org/10.1134/s0031918x15120078
[CROSSREF]
50. B. Liu, A. Vivek, W. Lin, C. Prothe, and G. Daehn, Solid-State Dissimilar Joining of Ti-Fe with Nb and Cu Interlayers, Weld. J. 94(7) (2015) 219s–224s.
54. K. N. Campo, L. C. Campanelli, L. Bergmann, D. J. F. Santos, and C. Bolfarini, Microstructure and Interface Characterization of Dissimilar Friction Stir Welded Lap Joints between Ti-6Al-4V and AISI 304,
Mater. Des. 1980-2015(56) (2014) 139–145.
https://doi.org/10.1016/j.matdes.2013.11.002
[CROSSREF]