1. Li. Peng, Li. Jinglong, Salman. Muhammad, Liang. Li, Xiong. Jiangtao, and Zhang. Fusheng, Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V/SUS321 joints,
Materials and Design. 56 (2014) 649–656.
https://doi.org/10.1016/j.matdes.2013.11.065
[CROSSREF]
2. C. H. Muralimohan, M. Ashfaq, Rouholah. Ashiri, V. Muthupandi, and K. Sivaprasad, Analysis and characterization of the role of Ni interlayer in the friction welding of titanium and 304 austenitic stainless steel,
Me-tallurgical and Materials Transactions A. 47(1) (2016) 347–359.
https://doi.org/10.1007/s11661-015-3210-z
[CROSSREF] [PDF]
3. D. Ananthapadmanaban, V. Seshagiri, Nikhil. Rao, K. Abraham, and Rao. Prasad, A study of mechanical properties of friction welded mild steel to stainless steel joints,
Materials and Design. 30(7) (2009) 2642–2646.
https://doi.org/10.1016/j.matdes.2008.10.030
[CROSSREF]
6. R. L. Klueh, J. F. King, and J. L. Griffith, A simple test for dissimilar-metal welds, Welding Research Supplement. 1 (1983) 154–159.
7. C. H. Muralimohan, S. Haribabu, Y. Hariprasada Reddy, V. Muthupandi, and K. Sivaprasad, Evaluation of microstructures and mechanical properties of dissimilar materials by friction welding,
Procedia Materials Science. 5 (2014) 1107–1113.
https://doi.org/10.1016/j.mspro.2014.07.404
[CROSSREF]
9. C. H. Muralimohan, V. Muthupandi, and K. Sivaprasad, The influence of aluminium intermediate layer in dissimilar friction welds,
International Journal of Materials Research. 105(4) (2014) 350–357.
https://doi.org/10.3139/146.111031
[CROSSREF]
10. A. N. Dobrovidov, Selection of optimum conditions for the friction welding of high speed steel 45, Welding Production. 22(3) (1975) 22–26.
14. Peng. Li, Honggang. Dong, Yueqing. Xia, Xiaohu. Hao, Shuai. Wang, Longwei. Pan, and Jun. Zhou, Inhomo-geneous interface structure and mechanical properties of rotary friction welded TC4 titanium alloy/316L stainless steel joints,
Journal of Manufacturing Processes. 33 (2018) 54–63.
https://doi.org/10.1016/j.jmapro.2018.05.001
[CROSSREF]
15. Cheepu. Muralimohan, M. Ashfaq, and V. Muthupandi, A new approach for using interlayer and analysis of the friction welding of titanium to stainless steel,
Transactions of the Indian Institute of Metals. 70(10) 2591–2600.
https://doi.org/10.1007/s12666-017-1114-x
[CROSSREF]
16. W. Y. Li, T. J. Ma, S. Q. Yang, Q. Z. Xu, Y. Zhang, J. L. Li, and H. L. Liao, Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel,
Materials Letters. 62(2) (2008) 293–296.
https://doi.org/10.1016/j.matlet.2007.05.037
[CROSSREF]
17. Kimura. Masaaki, Ohtsuka. Yosuke, Kusaka. Masahiro, Seo. Kenji, and Fuji. Akiyoshi, Effect of friction time and friction pressure on tensile strength of welded joint for medium and high carbon steels by low heat input friction welding method,
Journal of the Japan Welding Society. 23(4) (2005) 577–586.
https://doi.org/10.2207/qjjws.23.577
[CROSSREF]
18. N. Arivazhagan, Singh. Surendra, Prakash. Satya, and G. M. Reddy, Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding,
Materials and Design. 32 (2011) 3036–3050.
https://doi.org/10.1016/j.matdes.2011.01.037
[CROSSREF]
19. Se-Gyoung. Lee, Byung-Hoon. Min, Su-Hyun. Choi, Do-Ki. Shim, and Taeg-Ki. Min, A study on mechanical properties and friction weldability of SKH51 and SM45C,
Journal of KWJS. 25(5) (2007) 53–58.
[CROSSREF]
21. P. Sathiya, S. Aravindan, and A. Noorul Haq, Mechanical and metallurgical properties of friction welded AISI 304 austenitic stainless steel,
International Journal of Advanced Manufacturing Technology. 26 (2005) 505–511.
https://doi.org/10.1007/s00170-004-2018-6
[CROSSREF]
24. Haribabu. Sangathoti, Cheepu. Muralimohan, Tammineni. Lakshmipathi, Gurasala. Naresh Kumar, Devuri. Venkateswarlu, and Kantumuchu. Venkata Charan, In : Lakshminarayanan A, Idapalapati S, Vasudevan M, editors. Dissimilar friction welding of AISI 304 austenitic stainless steel and AISI D3 tool steel:mechanical properties and microstructural characterization. Advances in Materials and Metallurgy,
Lecture Notes in Mechanical Engineering. (2019) 271–281.
https://doi.org/10.1007/978-981-13-1780-4_27
[CROSSREF]
26. I. Nikitin and M. Besel, Correlation between residual stress and plastic strain amplitude during low cycle fatigue of mechanically surface treated austenitic stainless steel AISI 304 and ferritic-pearlitic steel SAE 1045,
Materials Science and Engineering. A491(1-2) (2008) 297–303.
https://doi.org/10.1016/j.msea.2008.03.034
[CROSSREF]
27. J. Outinen and P. Mäkeläinen, Mechanical properties of structural steel at elevated temperatures and after cooling down,
Second International Workshop, Structures in Fire, Christchurch. (2002) 273–290.
https://doi.org/10.1002/fam.849
[CROSSREF]
29. P. Sathiya, S. Aravindan, and A. Noorul Haq, Op-timization for friction welding parameters with multiple performance characteristics,
International Journal of Mechanics and Materials in Design. 3(4) (2006) 309–318.
https://doi.org/10.1007/s10999-007-9037-z
[CROSSREF]
30. S. P. Murugan, M. Cheepu, V. Vijayan, C. Ji, and Y.-D. Park, The resistance spot weldability of a stainless seel/ aluminium/low carbon steel 3-ply clad sheet,
Journal of Welding and Joining. 36(1) (2017) 25–33.
https://doi.org/10.5781/JWJ.2018.36.1.3
[CROSSREF] [PDF]
32. M. Cheepu, V. Muthupandi, D. Venkateswarlu, B. Srinivas, and W. S. Che, In : Parinov I, Chang SH, Gupta V, editors. Interfacial microstructures and characterization of the titanium-stainless steel friction welds using interlayer technique,
Advanced Materials. PHENMA 2017. Springer Proceedings in Physics, vol 207. Springer, Cham. (2018) 267–283.
http://doi.org/10.1007/978-3-319-78919-4_21
[CROSSREF]
34. M. Cheepu, B. Srinivas, N. Abhishek, T. Ramachandraiah, S. Karna, D. Venkateswarlu, S. Alapati, and W. S. Che, Dissimilar joining of stainless steel and 5083 aluminum alloy sheets by gas tungsten arc welding-brazing process,
IOP Conference Series:Materials Science and Engineering. 330(1) (2018) 012048.
https://doi.org/10.1088/1757-899X/330/1/012048
[CROSSREF]
35. J. Moon, H. Y. Ha, and T. H. Lee, Microstructure evolution and corrosion behavior in the welds of high interstitial FeCrMnNC austenitic stainless steels,
Journal of Welding and Joining. 35(4) (2017) 51–57.
http://doi.org/10.5781/JWJ.2017.35.4.8
[CROSSREF] [PDF]
36. M. Cheepu, V. Muthupandi, B. Srinivas, and K. Sivaprasad. Development of a friction welded bimetallic joints between titanium and 304 austenitic stainless steel.
Techno-Societal 2016, International Conference on Advanced Technologies for Societal Applications. Springer, Cham; (2016), p. 709–717
http://doi.org/10.1007/978-3-319-53556-2_73
[CROSSREF]
38. M. Joonoh, J. Lee, C.-H. Lee, T.-H. Lee, S.-J. Jung, S.-H. Jeong, and H.-U. U. Hong, Microstructure and mechanical properties of the welds of reduced-activation ferritic / martensitic steels,
Journal of Welding and Joining. 36(1) (2018) 18–24.
https://doi.org/10.5781/JWJ.2018.36.1.2
[CROSSREF]