Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-04.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Experimental Study on Evaluation of Bonding Strength of Adhesively Bonded Joints by Adhesive
  • Search
  • Advanced Search
J Weld Join > Volume 30(6); 2012 > Article
Research Paper
Journal of KWJS 2012;30(6):62-67.
DOI: https://doi.org/10.5781/KWJS.2012.30.6.62    Published online December 23, 2012.
Experimental Study on Evaluation of Bonding Strength of Adhesively Bonded Joints by Adhesive
Ki-Yeob Kang*, Jae-Myung Lee*
Correspondence:  Jae-Myung Lee,
Email: jaemlee@pusan.ac.kr
Abstract
In this study, the bonding strengths of adhesively bonded joints are experimentally investigated. A series of lap-shear tests are conducted using single lap type adhesive joints. In order to analyse the joint fabrication factors that affected the bonding strength, the parametric tests are conducted with various thickness of adhesive, surface roughness and fillet of adhesive. In addition, for the comparative study with the welded joint, lap-shear tests using specimens with 2 welded sides and 4 welded sides are also carried out. The quantitative results of the strength analysis are summarized, and some proposals are made on setting up testing standards for adhesively bonded joints.
Key Words: Lap shear joint, Adhesive thickness, Surface roughness of adherends, Tensile-shear strength
TOOLS
METRICS Graph View
  • 0 Crossref
  •    
  • 3,051 View
  • 13 Download
Related articles

A Study on the Evaluation of Fatigue Strength of Welded Lap Joint with Element Stress Approach2014 February;32(1)

Evaluation of Failure Mode and Strength on Baking Time of Adhesive for Hybrid Joining2011 December;29(6)

A Experiment Study for Selection of Welding Condition of fillet Welded Structure2011 August;29(4)

Strength Evaluation of Adhesively Bonded Single-Lap Joints by Ultrasonic Signal Analysis 2004 October;22(5)

Evaluation of Flaws in Adhesively Bonded Joint using Ultrasonic Signal Analysis2004 April;22(2)

ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI