Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 A Study of Predicting 3-dimensional Welding Residual Stresses Distribution for T-joint Fillet Specimen

Journal of KWJS 2010;28(2):84-90.
Published online May 13, 2010.
십자형 용접 시편의 3차원 용접 잔류응력 분포 예측에 관한 연구
, , , ,
 
A Study of Predicting 3-dimensional Welding Residual Stresses Distribution for T-joint Fillet Specimen
Mi-Ji Yoo, Jang-Hyun Lee, Se-Yun Hwang, Kyung-Su Kim, Sung-Chan Kim
Abstract
  Fillet welding accounts for about 80% of all constructing process of ship and ocean structure. T-joint is one of the typical shapes which are frequently reported to experience the fatigue damage when the marine structure meets the storm loads. The fatigue damage is affected by the magnitude of residual stresses on the weld. Recently, many shipping registers and design guidances have required that the fatigue strength assessment method should be compensated by the effect of the residual stress in case that the random loading or storm loading is applied to the marine vessels. This study suggests the computational procedure to analyze the residual stresses of T-joint specimen that is frequently reported to get damaged by the storm loading. Experiment by XRD as well as the 3-D computational welding model is presented in order to get the profile of residual stress. Throughout the comparison of experimental result with the computational result, the computational model was validated. Thereafter, characteristics of the residual stresses in the joint are discussed..
Key Words: Welding, Residual stress, Fatigue damage, FEA, XRD, T-joint, Extreme storm load


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI