Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-12.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 Effects of Al, Mn and Si Contents on Spatter, Fume, Microstructure and Mechanical Property with 490㎫ Grade Flux Core Wire

Journal of KWJS 2010;28(1):60-65.
Published online March 10, 2010.
490㎫급 플럭스코어드 와이어의 스패터, 흄, 미세조직 및 기계적 성질에 미치는 Al, Mn, Si의 영향
, , , ,
 
Effects of Al, Mn and Si Contents on Spatter, Fume, Microstructure and Mechanical Property with 490㎫ Grade Flux Core Wire
Min-Chul Kim, Won-Jung Jung, Bong-Keun Lee, Jong-Pan Kong, Chung-Yun Kang
Abstract
  This paper is concerned with effects of Al, Mn and Si contents on spatter, fume, microstructure and mechanical property with 490㎫ Grade Flux Core Wire(FCW). Ten kinds of FCW were fabricated by varying Mn, Si and Al contents and each FCW was weld for check the amount of spatter and fume generations, microstructures and mechanical property. Amount of spatter and fume generations was decreased with the increasing Si contents and decreasing by Al contents in FCW. And, their microstructure of weld metal were changed by Mn, Al and Si contents in FCW. With increasing of Al and Si, acicular ferrite was fine and volume fraction of acicula ferrite was increased. Thereby leading to improvement of Charpy impact property and strength.
Key Words: Flux Core Wire(FCW), Fume, Spatter, Microstructure, Mechanical property, 490㎫ grade


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI