Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-11.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 100 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 101 A Study about Analysis of Weld Distortion using Genetic Algorithm

Journal of KWJS 2009;27(4):54-59.
Published online September 14, 2009.
유전적 알고리듬을 이용한 용접변형 해석에 관한 연구
, , , , , ,
 
A Study about Analysis of Weld Distortion using Genetic Algorithm
Ill-Soo Kim, Hak-Hyoung Kim, Han-Kee Jang, Hee-Jin Kim, Sung-Kyu Kwak, Hoi-Soo Ryoo, Ji-Yeon Shim
Abstract
  In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak’s moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak’s work but also the developed model was validated with molten zone section experimental data.
Key Words: Weld distortion, Genetic algorithm, Double-ellipse heat input model, Finite element method


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI