Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Analysis of Pulsed GMAW Using Force-Displacement Model

Journal of KWJS 2009;27(1):59-64.
Published online March 12, 2009.
힘-변위 모델을 이용한 펄스 GMAW의 해석
, ,
 
Analysis of Pulsed GMAW Using Force-Displacement Model
Arif Nabeel, LeeJae Hak, YooChoong Don
Abstract
  In order to determine the One-Drop One-Pulse (ODOP) condition of the pulsed gas metal arc (GMA) welding, the drop detaching phenomenon during the peak time is investigated using the force-displacement model. The drop detaching criterion is established based on the displacement of the pendant drop, and the forces exerted on the drop are calculated using the Modified Force Balance Model (MFBM). The effects of wire melting on the drop size and force are included in the force-displacement model. While the peak current has most significant effects on the drop detaching time, the initial drop mass prior to the peak time also influences drop transfer. The calculated results show good agreements with the experimental data, which implies that the ODOP condition can be predicted using the force-displacement method.
Key Words: Pulsed GMAW, Force-displacement model, ODOP, MFBM, Wire melting


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI