Determination of critical CTOD using crack flank opening angle method in general yield regime
Fatigue & Fracture of Engineering Materials & Structures. 2010;34(4):260-269 
CTOD estimates of surface cracked wide plates in bending—II. Level-3 CTOD method
Engineering Fracture Mechanics. 1991;40(3):641-651
Crack Path Investigation Using the Generalized Maximum Tangential Stress Criterion: Antisymmetrical Four-Point Bending Specimen
Applied Mechanics and Materials. 2013;436:108-113
CTOD-R Curve Tests of API 5L X90 By SENT Specimen Using a Modified Normalization Method
Fatigue & Fracture of Engineering Materials & Structures. 2016;40(2):288-299
3D elastic-plastic finite element analysis for CTOD and J in SENB, SENAB and SENT specimen geometries
Shallow Crack Fracture Mechanics Toughness Tests and Applications. 1993;182-193
Numerical Study of Crack Propagation Path in Three-Point Bending Beam Using Extended Finite Element Method
Applied Mechanics and Materials. 2013;353-356:3615-3618
An effective method to investigate short crack growth behaviour by reverse bending testing
International Journal of Fatigue. 2007;29(3):565-574
Crack-tip opening displacement (CTOD)
Introduction to Fracture Mechanics. 2021;75-80
Fatigue crack growth behaviour in ferritic ductile iron with surface crack under reverse bending
Computational Materials Science. 2007;41(1):38-43
Studying on the Propagation Behavior of Bent Crack Bending from Slant Pre-Crack with Compressive Residual Stress
Advanced Materials Research. 2012;433-440:6558-6564