 |
|
Repair Properties of Desulfurization Pump Part Layers by Direct Energy Deposited Additive Manufacturing Process
Sungwook Kim, Sunglock Lim, Chang-Keun Chun
J Weld Join. 2020;38(1):92-97. Published online 2020 Feb 20 DOI: https://doi.org/10.5781/JWJ.2020.38.1.10
|
|
Citations to this article as recorded by
 A Study on the Development of Adaptive 5-axis Path Generation CAM S/W for High Speed Metal 3D Printer
Sung Gun Lee, Hyun Chul Kim
Journal of the Korean Society for Precision Engine.2023; 40(5): 367. CrossRef Superior tensile and fatigue properties of Incoloy 901 repair welds produced by direct energy deposition
Jongkee Ahn, Chiwon Kim, Dongyeop Lee, Bohee Kim, Hyun-Uk Hong, Je-Hyun Lee
Journal of Materials Research and Technology.2022; 19: 3554. CrossRef Effect of Filler Metal Type on Microstructure and Mechanical Properties of Fabricated NiAl Bronze Alloy Using Wire Arc Additive Manufacturing System
Jaewon Kim, Jaedeuk Kim, Jooyoung Cheon, Changwook Ji
Metals.2021; 11(3): 513. CrossRef Optimization of Direct Energy Deposition of 304L Stainless Steel through Laser Process Parameters
SeongSeon Shin, Sung-Min Kwon, ChiYen Kim, JongHoon Lee, JunHo Hwang, HyunDeok KIm
Journal of Welding and Joining.2021; 39(2): 182. CrossRef Comparison of Mechanical Properties of Ni-Al-Bronze Alloy Fabricated through Wire Arc Additive Manufacturing with Ni-Al-Bronze Alloy Fabricated through Casting
Jisun Kim, Jaewoong Kim, Changmin Pyo
Metals.2020; 10(9): 1164. CrossRef Evaluation of Bead Geometry for Aluminum Parts Fabricated Using Additive Manufacturing-Based Wire-Arc Welding
Hee-keun Lee, Jisun Kim, Changmin Pyo, Jaewoong Kim
Processes.2020; 8(10): 1211. CrossRef
|