 |
|
A Study for the Welding Condition Optimization using Response Surface Method in TIG Butt Welding of A6061 Aluminum Alloy
Sunghun Jung, Doyup Lee, Bong Ueoul Kim, Mokyoung Lee
J Weld Join. 2018;36(3):1-7. Published online 2018 Jun 14 DOI: https://doi.org/10.5781/JWJ.2018.36.3.1
|
|
Citations to this article as recorded by
 Prediction of Weld Tensile-Shear Strength using ANN Based on the Weld Shape in Aluminum Alloy GMAW
Dong-Yoon Kim, June Hyung Hwang, Gwang-Gook Kim, Young-Min Kim, Jiyoung Yu, Junhong Park
Journal of Welding and Joining.2023; 41(1): 17. CrossRef Prediction Model for Tensile Shear Strength of Gas Metal Arc Weld using a Laser Vision Sensor
Changhoon Lee, Dong-Yoon Kim, Jason Cheon, Jiyoung Yu
Journal of Welding and Joining.2023; 41(5): 349. CrossRef A Study on Gap Bridging Formation Conditions in Butt Root Pass Welding Using GTAW
Daekyu Park, Changsub Song, Youngwhan Park
Journal of Welding and Joining.2023; 41(5): 335. CrossRef [ISMT2021] Effect of parameters on penetration properties in butt welding of super duplex stainless steel using PAW-TIG heat source
Jun-Sub Yeo, Moo-Keun Song, Jong-Do Kim
Journal of Advanced Marine Engineering and Technol.2022; 46(1): 15. CrossRef Optimization of Welding Parameters for Resistance Spot Welding of AA3003 to Galvanized DP780 Steel Using Response Surface Methodology
Jin-Hee Bae, Yeong-Do Park, Mokyoung Lee
International Journal of Automotive Technology.2021; 22(3): 585. CrossRef Weld Shape Analysis using Central Composite Design in the Laser Welding of Aluminum Alloys
Donghyeok Choi, Joonghan Shin
Journal of Welding and Joining.2020; 38(5): 502. CrossRef
|