 |
|
Trend of Metal 3D Printing by Welding
Jae-Gyu Byun, Sang-Myung Cho
J Weld Join. 2016;34(4):1-8. Published online 2016 Aug 23 DOI: https://doi.org/10.5781/JWJ.2016.34.4.1
|
|
Citations to this article as recorded by
 Numerical investigation of thermal behavior during the laser-assisted directed energy deposition process for additive manufacturing
Ehtesham Ali, Hwabhin Kwon, Yunkon Joo, Je-Hyun Lee, Heesung Park
Applied Physics B.2024;[Epub] CrossRef A critical review of wire arc additive manufacturing of nickel-based alloys: principles, process parameters, microstructure, mechanical properties, heat treatment effects, and defects
Manickam Bhuvanesh Kumar, Paulraj Sathiya, Sathyamangalam Munusamy Senthil
Journal of the Brazilian Society of Mechanical Sci.2023;[Epub] CrossRef A Study on the Change of Wire Feeding Speed in GTA Welding (Ⅱ) - Development of Weld Bead Shape Prediction Model -
Daekyu Park, Changik Lee, Youngwhan Park
Journal of Welding and Joining.2023; 41(3): 207. CrossRef A Study on the Change of Wire Feeding Speed in GTA Welding (Ⅰ) - Changes in the Modes of Metal Transfer -
Daekyu Park, Jehyoung Cho, Youngwhan Park
Journal of Welding and Joining.2023; 41(3): 202. CrossRef 3-Dimensional Printing for Hip Surgery: Current Landscape and Future Perspectives
Heejae Won, Seung-Hoon Baek, Shin-Yoon Kim
Journal of the Korean Orthopaedic Association.2022; 57(1): 1. CrossRef Advanced metal transfer additive manufacturing of high temperature turbine blades
Daniel Thomas, Andy Gleadall
The International Journal of Advanced Manufacturin.2022; 120(9-10): 6325. CrossRef A Study on Metal 3D Printing Internal Pore Control for the Fabrication of Metal Scaffolds
Byeong-Ju Jin, Ki-Young Park
Journal of Welding and Joining.2022; 40(4): 337. CrossRef Effect of Additive Machines and Powders on Mechanical Properties of Stainless Steel 316L Manufactured by L-PBF
Dongjin Oh, Youngjun Kang, Kidong Kim
Journal of Welding and Joining.2022; 40(4): 322. CrossRef Directed Energy Deposition (DED) Process: State of the Art
Dong-Gyu Ahn
International Journal of Precision Engineering and.2021; 8(2): 703. CrossRef Effect of Filler Metal Type on Microstructure and Mechanical Properties of Fabricated NiAl Bronze Alloy Using Wire Arc Additive Manufacturing System
Jaewon Kim, Jaedeuk Kim, Jooyoung Cheon, Changwook Ji
Metals.2021; 11(3): 513. CrossRef Effect of HIP Process on Fatigue Performance for SS 316L Manufactured by PBF
Dongjin Oh, Yongjoon Kang, Gidong Kim, Soyoung Park, Sangwoo Song
Journal of Welding and Joining.2020; 38(1): 41. CrossRef Comparison of Mechanical Properties of Ni-Al-Bronze Alloy Fabricated through Wire Arc Additive Manufacturing with Ni-Al-Bronze Alloy Fabricated through Casting
Jisun Kim, Jaewoong Kim, Changmin Pyo
Metals.2020; 10(9): 1164. CrossRef LAM-DED Process for Repair and Maintenance of Cast Iron Components using Metallic Powder Alloys
Jin-Young Kim, Dong-Mok Lee
Journal of Welding and Joining.2020; 38(4): 349. CrossRef Evaluation of Bead Geometry for Aluminum Parts Fabricated Using Additive Manufacturing-Based Wire-Arc Welding
Hee-keun Lee, Jisun Kim, Changmin Pyo, Jaewoong Kim
Processes.2020; 8(10): 1211. CrossRef Technology and Development Trends of Small Launch Vehicles
Junsub Choi, Hwanil Huh, Wonkeun Ki
Journal of the Korean Society of Propulsion Engine.2020; 24(5): 91. CrossRef A Study on Deformation According to Welding Speed of Root Pass in GTAW Butt Joint Welding
Chang-Min Yu, Sang-Yeol Kim, Jung-Hyun Park, Gi-Jeong Seo, Sang-Myung Cho
Journal of Welding and Joining.2019; 37(5): 493. CrossRef A Study on Process Robustness of Lap Joint Fillet Welding in GTAW Using C Type Filler
Sang-Yeol Kim, Gi-Jeong Seo, Woo-Hyeon Ju, Sang-Myung Cho
Journal of Welding and Joining.2019; 37(5): 469. CrossRef Effect of Process Parameters on the Formation of Lack of Fusion in Directed Energy Deposition of Ti-6Al-4V Alloy
Desrilia Nursyifaulkhair, Nokeun Park, Eung Ryul Baek, Jong-bong Lee
Journal of Welding and Joining.2019; 37(6): 579. CrossRef Trend of DED type Additive Manufacturing Technology for Titanium
Sungwook Kim, Chang-Keun Chun
Journal of Welding and Joining.2017; 35(4): 23. CrossRef Recent Studies of the Laser Cladding of High Entropy Alloys
Sangwoo Nam, Cheolhee Kim, Young-Min Kim
Journal of Welding and Joining.2017; 35(4): 58. CrossRef
|