Journal of Welding and Joining

Research Paper

October 31, 2024

Research on the Optimization of Oscillation for the Joint Quality of Laser Welded Joints in Automobile Seat Frames

JiYoung Shin, HyeonJe Kim, JaeYong Jang, et al.

J Weld Join. 2024;42(5):445-457.

The increasing adoption of high-strength steel in automotive manufacturing has made laser welding a preferred technique due to its ability to reduce thermal deformation and facilitate single-sided welding. Despite these...

Research Paper

October 31, 2024

Revisiting the Concept of Property Optimization of Low Temperature Phase Transformed Microstructures of GIGASTEEL Welds

Gyuyeol Bae, Joonoh Moon, Bo-Young Jeong

J Weld Join. 2024;42(5):458-462.

Although the need for automobile lightening continues to increase in preparation for the era of electrical vehicles, the application of steel, which has strengths in price and recycling in the...

Research Paper

October 31, 2024

Evaluation of Secondary Buckling and Ultimate Strength Behaviour According to Boundary Conditions of Curved Plate Subjected to Compressive Load

Myung-Su Yi, Jae-Yong Ko, Joo-Shin Park

J Weld Join. 2024;42(5):463-471.

This paper analyzed the buckling and ultimate strength characteristics of plate members with curvature, which are essentially used in ships and marine structures, through numerical analysis. Major structural members are...

Research Paper

October 31, 2024

Characteristics of Solidification Cracking for Ni-P Coated Cu-Al5052 Single-Mode Fiber Laser Welds

Ye-Ji Yoo, Eun-Joon Chun

J Weld Join. 2024;42(5):472-480.

This study fundamentally examines the characteristics of solidification cracking in Cu-Al5052 single-mode fiber laser welding by utilizing uncoated and Ni-P coated Cu plates for the high durability busbar welding of...

Research Paper

October 31, 2024

Evaluation of Quality for Flow Drill Screw (FDS) Joining Process Based on Loosening Torque

Tae-Jeong Kim, Se-Jin Ko, Wook-Jin Oh, et al.

J Weld Join. 2024;42(5):481-486.

Although the SPR process is widely used for joining of multi-materials, the FDS process is used when one-way joining is required, such as space constraints or closed cross-sectional parts. The...

Research Paper

October 31, 2024

A Primary Study on the Applicability of Gel-Type Filler Materials to Root Pass Welds of the Thick Plate

Young-Min Kim, Sangwoo Nam, Insung Hwang, et al.

J Weld Join. 2024;42(5):487-494.

Welding generally uses filler material to create deposited weld metal. Filler materials play a significant role in welding by providing the material needed to fill and form the joint. Existing...

Research Paper

October 31, 2024

Analyzing the Influence of Welding Process Selection on Residual Stresses in Tube-to-Tubesheet Welded Joints

Manoj Kumar Jangid, Vikram Roy, M. T. Kamble, et al.

J Weld Join. 2024;42(5):495-513.

Tube-to-tubesheet joints are used in the fabrication of shell and tube type heat exchangers, steam generators, boilers, condensers, and end shields of pressure tube type nuclear reactors like CANDU (Canada...

Research Paper

October 31, 2024

Quality Classification of Multi-Layer Copper Foil Stacks Welds for Ultrasonic Welding Using CNN and RNN

Seon-myoung Hong, Jae-woo Cho, Hee-seon Bang

J Weld Join. 2024;42(5):514-520.

This study aims to develop a model for classifying weld quality using data acquired in real-time during the ultrasonic welding process. The data utilized includes LVDT (DP-10, DAQ-Express) and power...

Research Paper

October 31, 2024

Fracture Toughness Estimate of H-Section Steel for Offshore Structure

Gyubaek An, Jiseung Lee, Wonjun Jo, et al.

J Weld Join. 2024;42(5):521-529.

In this study, a novel estimating equation based on the WES2808 standard was proposed to predict fracture toughness through the transition temperature of Charpy impact toughness and CTOD (Crack Tip...

Research Paper

October 31, 2024

Study on the Electron Beam Repair Welding of 5000 Aluminum Alloys

Insung Choi, Heon min Seo, In-Chul Jung, et al.

J Weld Join. 2024;42(5):530-538.

Electron beam welding (EBW) has been attracted due to its high energy density, high depth-to-width ratio, low thermal strain, compared with arc and laser welding. In addition, it ensures high...

Research Paper

October 31, 2024

A Study on the Effects of Offset and Welding Speed on Bead Shape and Welding Defects in the FCA Fillet Welding Process

Junsung Bae, Sang-Hyun Ahn, Gwang-Ho Jeong, et al.

J Weld Join. 2024;42(5):539-549.

Many industries, such as automobile, aerospace, heavy industries, etc, have been interested in welding automation due to cost reduction and improving productivity. For welding automation, seam tracking plays an important...

Research Paper

October 31, 2024

Enhancement in Mechanical Properties of AA5052 Sheet for Small Ship by Cold Roll-Bonding Process

Yu-Jong Roh, Hyeokjun Yang, Jun Yeong Jeong, et al.

J Weld Join. 2024;42(5):550-559.

A cold roll-bonding (CRB) process was applied to enhance the mechanical properties of AA5052 sheet for small ship. Two and four AA5052 sheets of 1 mm thickness, 40 mm width...

Research Paper

October 31, 2024

Tensile Strength Property with PdCo-Cu Multi-Layer Lamination and Heat Treatment of MEMS Probe for Probe Card

So-Hee Hyun, Mi-Song Kim, Won Sik Hong, et al.

J Weld Join. 2024;42(5):560-566.

Cantilever wire probe card has limited to transport high-speed signal because of long wire but it is suitable for inspecting high-current and high voltage semiconductor such as wide band gap...

Current Issue: Volume 42(5); Oct 2024

This archive contains links to the full-text of all issues of J Weld Join.

Current issue

Volume 42(5); October

All issues

Vol. 42
2024

v.42(1)
2024

v.42(2)
2024

v.42(3)
2024

v.42(4)
2024

v.42(5)
2024

Vol. 41
2023

v.41(1)
2023

v.41(2)
2023

v.41(3)
2023

v.41(4)
2023

v.41(5)
2023

v.41(6)
2023

Vol. 40
2022

v.40(1)
2022

v.40(2)
2022

v.40(3)
2022

v.40(4)
2022

v.40(5)
2022

v.40(6)
2022

Vol. 39
2021

v.39(1)
2021

v.39(2)
2021

v.39(3)
2021

v.39(4)
2021

v.39(5)
2021

v.39(6)
2021

Vol. 38
2020

v.38(1)
2020

v.38(2)
2020

v.38(3)
2020

v.38(4)
2020

v.38(5)
2020

v.38(6)
2020

Vol. 37
2019

v.37(1)
2019

v.37(2)
2019

v.37(3)
2019

v.37(4)
2019

v.37(5)
2019

v.37(6)
2019

Vol. 36
2018

v.36(1)
2018

v.36(2)
2018

v.36(3)
2018

v.36(4)
2018

v.36(5)
2018

v.36(6)
2018

Vol. 35
2017

v.35(1)
2017

v.35(2)
2017

v.35(3)
2017

v.35(4)
2017

v.35(5)
2017

v.35(6)
2017

Vol. 34
2016

v.34(1)
2016

v.34(2)
2016

v.34(3)
2016

v.34(4)
2016

v.34(5)
2016

v.34(6)
2016

Vol. 33
2015

v.33(1)
2015

v.33(2)
2015

v.33(3)
2015

v.33(4)
2015

v.33(5)
2015

v.33(6)
2015

Vol. 32
2014

v.32(1)
2014

v.32(2)
2014

v.32(3)
2014

v.32(4)
2014

v.32(5)
2014

v.32(6)
2014

Journal of KWJS1983 (Vol.1 No.1) to 2013 (Vol.31 No.6)

Vol. 31
2013

v.31(1)
2013

v.31(2)
2013

v.31(3)
2013

v.31(4)
2013

v.31(5)
2013

v.31(6)
2013

Vol. 30
2012

v.30(1)
2012

v.30(4)
2012

v.30(2)
2012

v.30(3)
2012

v.30(5)
2012

v.30(6)
2012

Vol. 29
2011

v.29(1)
2011

v.29(2)
2011

v.29(3)
2011

v.29(4)
2011

v.29(5)
2011

v.29(6)
2011

Vol. 28
2010

v.28(1)
2010

v.28(2)
2010

v.28(3)
2010

v.28(4)
2010

v.28(5)
2010

v.28(6)
2010

Vol. 27
2009

v.27(1)
2009

v.27(2)
2009

v.27(3)
2009

v.27(4)
2009

v.27(5)
2009

v.27(6)
2009

Vol. 26
2008

v.26(1)
2008

v.26(2)
2008

v.26(3)
2008

v.26(4)
2008

v.26(5)
2008

v.26(6)
2008

Vol. 25
2007

v.25(1)
2007

v.25(2)
2007

v.25(3)
2007

v.25(4)
2007

v.25(5)
2007

Vol. 24
2006

v.24(1)
2006

v.24(2)
2006

v.24(3)
2006

v.24(4)
2006

v.24(5)
2006

v.24(6)
2006

Vol. 23
2005

v.23(1)
2005

v.23(2)
2005

v.23(3)
2005

v.23(4)
2005

v.23(5)
2005

v.23(6)
2005

Vol. 22
2004

v.22(1)
2004

v.22(2)
2004

v.22(3)
2004

v.22(4)
2004

v.22(5)
2004

v.22(6)
2004

Vol. 21
2003

v.21(1) 2003	v.21(2) 2003	v.21(3) 2003	v.21(4) 2003	v.21(5) 2003	v.21(6) 2003
v.21(7) 2003

Vol. 20
2002

v.20(1)
2002

v.20(2)
2002

v.20(3)
2002

v.20(4)
2002

v.20(5)
2002

v.20(6)
2002

Vol. 19
2001

v.19(1)
2001

v.19(2)
2001

v.19(3)
2001

v.19(4)
2001

v.19(5)
2001

v.19(6)
2001

Vol. 18
2000

v.18(1)
2000

v.18(2)
2000

v.18(3)
2000

v.18(4)
2000

v.18(5)
2000

v.18(6)
2000

Vol. 17
1999

v.17(1)
1999

v.17(2)
1999

v.17(3)
1999

v.17(4)
1999

v.17(5)
1999

v.17(6)
1999

Vol. 16
1998

v.16(1)
1998

v.16(2)
1998

v.16(3)
1998

v.16(4)
1998

v.16(5)
1998

v.16(6)
1998

Vol. 15
1997

v.15(1)
1997

v.15(2)
1997

v.15(3)
1997

v.15(4)
1997

v.15(5)
1997

v.15(6)
1997

Vol. 14
1996

v.14(1)
1996

v.14(2)
1996

v.14(3)
1996

v.14(4)
1996

v.14(5)
1996

v.14(6)
1996

Vol. 13
1995

v.13(1)
1995

v.13(2)
1995

v.13(3)
1995

v.13(4)
1995

Vol. 12
1994

v.12(1)
Dec 1994

v.12(2)
Dec 1994

v.12(3)
Dec 1994

v.12(4)
Dec 1994

Vol. 11
1993

v.11(1)
Nov 1993

v.11(2)
Nov 1993

v.11(3)
Nov 1993

v.11(4)
Nov 1993

Vol. 10
1992

v.10(1)
Oct 1992

v.10(2)
Oct 1992

v.10(3)
Oct 1992

v.10(4)
Oct 1992

Vol. 9
1991

v.9(1)
Sep 1991

v.9(2)
Sep 1991

v.9(3)
Sep 1991

v.9(4)
Sep 1991

Vol. 8
1990

v.8(1)
Aug 1990

v.8(2)
Aug 1990

v.8(3)
Aug 1990

v.8(4)
Aug 1990

Vol. 7
1989

v.7(1)
Jul 1989

v.7(2)
Jul 1989

v.7(3)
Jul 1989

v.7(4)
Jul 1989

Vol. 6
1988

v.6(1)
Jun 1988

v.6(2)
Jun 1988

v.6(3)
Jun 1988

v.6(4)
Jun 1988

Vol. 5
1987

v.5(1)
May 1987

v.5(2)
May 1987

v.5(3)
May 1987

v.5(4)
May 1987

Vol. 4
1986

v.4(1)
Apr 1986

v.4(2)
Apr 1986

v.4(3)
Apr 1986

Vol. 3
1985

v.3(1)
Mar 1985

v.3(2)
Mar 1985

Vol. 2
1984

v.2(1)
Feb 1984

v.2(2)
Feb 1984

Vol. 1
1983

v.1(1)
Jan 1983

v.1(2)
Jan 1983

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

9,357	Review on Vacuum Laser Beam Welding
8,578	Strength Evaluation of Welded Aluminum T-joints, as a Function of Its Welding Process, Execution, Filler Material, and Weld Root Penetration
6,470	Study on Laser Welding of Dissimilar Materials between Aluminum and Copper (Ⅰ) - Research Trend in Laser Welding Technology and Materials Testing Methods -
6,021	A Study on Welding-induced Temperature Distribution and Deformation of IMO Type C LNG Fuel Tank Support Structures
5,317	Optimization of FC-CSP and MLCC Soldering Process Using Type 7 Solder Paste

Cited By 9	Changes in the Mechanical Properties and Microstructure of High Manganese Steel by High Heat Input Welding and General Welding Processes
Cited By 9	Comparison of Welding Deformation Characteristics by Circumferential Welding for Austenitic and Duplex Stainless Steel Pipe : Experimental Study
Cited By 8	Review on Vacuum Laser Beam Welding
Cited By 8	Development and Evaluation of Stainless Steel-Base Flux-Cored Wires for 9% Nickel Steel
Cited By 6	Joining Technologies and Solutions for Aluminum-based Battery Case Manufacturing