Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 36(4); Aug 2018
Research Papers
2031963
A Study on the Dissimilar Metal Joining of Aluminum to Steel Using the Arc Heat Source (Ⅱ) - Mechanism of Dissimilar Metal Joining -
Yong Kim, Ki-Young Park, Bo-Young Lee
J Weld Join. 2018;36(4):13-22.   Published online August 23, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031964
A Study on the Dissimilar Metal Joining of Aluminum to Steel Using the Arc Heat Source (Ⅲ) - Static Strength and Fracture Behaviors -
Yong Kim, Cheolhee Kim, Bo-Young Lee
J Weld Join. 2018;36(4):23-35.   Published online August 23, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031965
A Study on the Dissimilar Metal Joining of Aluminum to Steel Using the Arc Heat Source (Ⅳ) - Fatigue Behaviors Using Ultrasonic Elastic Resonance -
Yong Kim, Jae-Seong Kim, In-Sik Cho, Bo-Young Lee
J Weld Join. 2018;36(4):36-46.   Published online August 28, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Recent Trends about Modulation Technology of the Laser Beam Welding
Yong Kim, Cheolhee Kim
J Weld Join. 2018;36(4):47-57.   Published online August 31, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Review Paper
Review of Keyhole Refilling Technology in Friction Stir Welding
Jin Young Yoon, Sanghoon Kang, Sehun Rhee, Cheolhee Kim
J Weld Join. 2018;36(4):58-62.   Published online July 20, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Research Papers
Optimization of Welding Parameters in Resistance Spot Welding of 980 MPa Grade GA Steel Sheet using Multi-Response Surface Methodology
Sang-Gyu Choi, Insung Hwang, Munjin Kang, Soongkeun Hyun, Young-Min Kim
J Weld Join. 2018;36(4):63-69.   Published online August 24, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Welding Residual Stress Evaluation and Process Optimization of CTBA Trailing Arm using Finite Element Analysis
Jong-sung Kim, In-hyeok Im, Jung-sub Kim, Jung-sik Suh
J Weld Join. 2018;36(4):70-74.   Published online August 6, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Review Paper
A Review on Welding Residual Stress Measurement by Hole Drilling Technique and its Importance
R. Chakrabarti, P. Biswas, S. C. Saha
J Weld Join. 2018;36(4):75-82.   Published online July 23, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Research Paper
Effect of Fine Silica Filler Addition on the CTE and Void Behavior of Non-conductive Paste for CoB Flip Chip Bonding
Da-Eun Lim, Da-Hoon Jung, So-Jung Lee et al.
J Weld Join. 2018;36(4):83-88.   Published online August 6, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2022 by The Korean Welding and Joining Society.

Developed in M2PI