Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 31(5); Oct 2013
Special Issues
2031540
Specification of Governing Factors for High Accurate Prediction of Welding Distortion
Jae-Yik Lee, Kyong-Ho Chang, You-Chul Kim
J Weld Join. 2013;31(5):1-6.   Published online November 5, 2013
PDFPDF    
2031541
Verification of Validity of Governing Factors in High Accurate Prediction of Welding Distortion
Jae-Yik Lee, Kyong-Ho Chang, You-Chul Kim
J Weld Join. 2013;31(5):7-14.   Published online November 5, 2013
PDFPDF    
2031529
Prediction of Welding Imperfection with Idealization of Welding and Their Accuracy
Jae-Yik Lee, Kyong-Ho Chang, You-Chul Kim
J Weld Join. 2013;31(5):15-19.   Published online November 4, 2013
PDFPDF    
Research Papers
2031530
Heat Treatment Effect on Pitting Corrosion of Super Duplex Stainless Steel UNS S32750 FCA Welds
Bok-Su Jang, In-June Moon, Se-Cheol Kim, Jin-Hyun Koh
J Weld Join. 2013;31(5):20-25.   Published online November 5, 2013
PDFPDF    
2031532
Using Neural Network Algorithm for Bead Visualization
Chang-Dae Koo, Hyeong-Seok Yang, Jung-Yeong Kim, Sang-Ho Shin
J Weld Join. 2013;31(5):35-40.   Published online November 5, 2013
PDFPDF    
2031533
Measurement of Weld Material Properties of Alloy 617 Using an Instrumented Indentation Technique
Kee-Nam Song, Sung-Deok Hong, Dong-Seong Ro, Joo-Ha Lee, Jung-Hwa Hong
J Weld Join. 2013;31(5):41-46.   Published online November 5, 2013
PDFPDF    
2031534
Evaluation of Corrosion Resistance and Weldability for the Butt Welding Zone of Hot Rolled Clad Steel Plates
Jae-Won Park, Chul-ku Lee
J Weld Join. 2013;31(5):47-53.   Published online November 5, 2013
PDFPDF    
2031535
Joint Property of Sn-Cu-Cr(Ca) Middle Temperature Solder for Automotive Electronic Module
Junghwan Bang, Dong-Yurl Yu, Yong-Ho Ko, Jeonghan Kim, Chang-Woo Lee
J Weld Join. 2013;31(5):54-58.   Published online November 5, 2013
PDFPDF    
2031536
Failure Mechanism of Bendable Embedded Electronic Module Under Various Environment Conditions
Yun-Seong Jo, A Young Kim, Won Sik Hong
J Weld Join. 2013;31(5):59-63.   Published online November 5, 2013
PDFPDF    
2031537
Weldability of SUS304 and Ti Dissimilar Welds with Various Welding Speed using Single Mode Fiber Laser
Su-Jin Lee, Seiji Katayama, Jong-Do Kim
J Weld Join. 2013;31(5):64-70.   Published online November 5, 2013
PDFPDF    
2031538
The Effect of Zirconate Addition on the Joint Properties of Epoxy Adhesive for Car Body Assembly
Eun-taek Jeung, Hye-rim Lee, So-jeong Lee et al.
J Weld Join. 2013;31(5):71-76.   Published online November 5, 2013
PDFPDF    
2031539
Thermal Stability of the Mechanical and Thermal Conductive Properties on Cu-STS-Cu Clad Metal for LED Package Lead Fram
Young-Sung Kim, Il-Gwon Kim
J Weld Join. 2013;31(5):77-81.   Published online November 5, 2013
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI