Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 24(4); Aug 2006
Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive
Hyeon-Jin Cho, Heung-Ju Kim, Chang-Keun Cheon, Woong-Seong Chang
J Weld Join. 2006;24(4):1-5.   Published online October 16, 2006
PDFPDF    
Microstructures and Mechanical Properties of the Friction Stir Welded Dissimilar Joint of AZ31B/A6061
Heung-Ju Kim, Chang-Keun Cheon, Sook-Hwan Kim, Woong-Seong Chang
J Weld Join. 2006;24(4):6-10.   Published online October 16, 2006
PDFPDF    
Friction Stir Welding : Heat Input Calculation
Rajesh S.R, Heung-Ju Kim, Han-Sur Bang, Woong-Seong Chang
J Weld Join. 2006;24(4):11-14.   Published online October 16, 2006
PDFPDF    
Effect of Laser Welding Variables on the Formability of Si Added Steel Welds
Joon-Sik Park, In-Su Woo, Jong-Bong Lee
J Weld Join. 2006;24(4):15-21.   Published online October 16, 2006
PDFPDF    
A Study on CO2 Laser-TIG Hybrid Welding of Zinc-Coated Steel Sheet Part 1: Analysis of Welding Phenomena
Cheol-Hee Kim, Woong-Yong Choi, Hyun-Byung Chae, Jeong-Han Kim, Se-Hun Rhee
J Weld Join. 2006;24(4):22-26.   Published online October 16, 2006
PDFPDF    
A Study on CO2 Laser-TIG Hybrid Welding of Zinc-Coated Steel Sheet Part 2: Relationship between Welding Parameters and Weldability
Cheol-Hee Kim, Woong-Yong Choi, Hyun-Byung Chae, Jeong-Han Kim, Se-Hun Rhee
J Weld Join. 2006;24(4):27-31.   Published online October 16, 2006
PDFPDF    
Investigation of Cutting Characteristics in the Sharp Edge for the Case of Cutting of a Low Carbon Steel Sheet using High-power CW Nd:YAG Laser
Dong-Gyu Ahn, Young-Tae Yoo
J Weld Join. 2006;24(4):32-38.   Published online October 16, 2006
PDFPDF    
학회소식
편집부
J Weld Join. 2006;24(4):50-58.   Published online October 16, 2006
PDFPDF    
회원사동정 외
편집부
J Weld Join. 2006;24(4):59-65.   Published online October 16, 2006
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI