Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 21(2); Apr 2003
Spraying Technology(I)
김형준
J Weld Join. 2003;21(2):1-2.   Published online April 25, 2003
PDFPDF    
A Study on the Cutting Characteristics of AH36 Steel Plate Under Various Cutting Conditions
김인철, 김성일
J Weld Join. 2003;21(2):3-8.   Published online April 25, 2003
PDFPDF    
Prparation, Structure and Tribological Properties of Al-based Quasicrystalline Coatings Deposited by Thermal Spray Techniques
김유찬, 김도형, 김도향 et al.
J Weld Join. 2003;21(2):9-19.   Published online April 25, 2003
PDFPDF    
Amorphous Coating by Thermal Spray Process
이상용, 이창희
J Weld Join. 2003;21(2):20-26.   Published online April 25, 2003
PDFPDF    
Solid Lubricant Coating for lmproved Low Friction and Wear-resistance
한창민, 김형준, 황순영, 이창희
J Weld Join. 2003;21(2):27-34.   Published online April 25, 2003
PDFPDF    
A Study for Joining of Alumina Soldered by SiO2-CaO-Al2O3 Classes
안병국
J Weld Join. 2003;21(2):35-41.   Published online April 25, 2003
PDFPDF    
Wear Behavior of WC-12%Co/Low Carbon Steel Metal Matrix Composites(MMC) Welding Overlay
임희식, 김태형, 박경채
J Weld Join. 2003;21(2):42-49.   Published online April 25, 2003
PDFPDF    
Mechanical Properties and Microstructurctures in WC-12%Co/Low Carbon Steel Metal Matrix Composites(MMC) Welding Overlay
임회식, 김태형, 박경채
J Weld Join. 2003;21(2):50-56.   Published online April 25, 2003
PDFPDF    
Design nd Output Characteristic of AC Pule Current Waveform
조상명, 김태진, 이창주, 임성룡, 공현상, 김기정
J Weld Join. 2003;21(2):57-63.   Published online April 25, 2003
PDFPDF    
Microstructure and Mechanical Property of Brazed Joint in Duplex Stainless Steel, UNS32550
김대업, 강정윤
J Weld Join. 2003;21(2):64-69.   Published online April 25, 2003
PDFPDF    
Effect of Spot Welding Conditions on Spatter and Mechanical Strength Properties
서도원, 윤호철, 전양배, 임재규
J Weld Join. 2003;21(2):70-75.   Published online April 25, 2003
PDFPDF    
Optimization of Welding Parameters for Resistance Spot Welding of TRIP Steel using Response Surface Methodology
박현성, 김태형, 이세헌
J Weld Join. 2003;21(2):76-81.   Published online April 25, 2003
PDFPDF    
Transient Liquid Phase Bonding of Directionally Solidified Ni Base Superalloy, GTD-111(I)
강정윤, 권민석, 김인배, 김대업, 우인수
J Weld Join. 2003;21(2):82-88.   Published online April 25, 2003
PDFPDF    
Transient Liquid Phase Bonding of Directionally Solidified Ni Base Superalloy, GTD-111(II)
황형철, 김인배, 김대업, 우인수
J Weld Join. 2003;21(2):89-96.   Published online April 25, 2003
PDFPDF    
Shear Strength and Aging Characteristics in Solder Bumps for High Reliability Optical Module
유정희
J Weld Join. 2003;21(2):97-101.   Published online April 25, 2003
PDFPDF    
A Study on Design of Visual Sensor Using Scanning Beam for Shape Recognition of Weld Joint
배강열
J Weld Join. 2003;21(2):102-110.   Published online April 25, 2003
PDFPDF    
한국생산기술연구원 정밀접합용접팀
편집부
J Weld Join. 2003;21(2):111-112.   Published online April 25, 2003
PDFPDF    
학회소식
편집부
J Weld Join. 2003;21(2):113-119.   Published online April 25, 2003
PDFPDF    
회원사 동정
편집부
J Weld Join. 2003;21(2):120-126.   Published online April 25, 2003
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI