Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 19(5); Oct 2001
Fundamentals of One Side Welding
정호신
J Weld Join. 2001;19(5):1-5.   Published online October 25, 2001
PDFPDF    
A Review for Defect Assessment Criteria Weldment in Gas Pipeline
김우식
J Weld Join. 2001;19(5):6-11.   Published online October 25, 2001
PDFPDF    
The Fatigue Life Prediction of Defect in Pipeline Weldment
김영표, 김우식
J Weld Join. 2001;19(5):12-17.   Published online October 25, 2001
PDFPDF    
Defect Assessment Method for Welded Structures Based on Failure Assessment Diagram
김윤재, 허남수, 김영진
J Weld Join. 2001;19(5):18-25.   Published online October 25, 2001
PDFPDF    
A Materials-Based Approach to the Enhanced Fitness-For-Service Assessment for Welded Structures
장재일, 이정석, 주장복, 권동일, 최열
J Weld Join. 2001;19(5):26-32.   Published online October 25, 2001
PDFPDF    
Characteristics of CO₂ Laser Cladding with High Viscosity Mixed Powder
김재도, 전병철, 이영곤, 오동수
J Weld Join. 2001;19(5):33-37.   Published online October 25, 2001
PDFPDF    
Effect of S on Spatter Generation and Droplet Transfer Phenomena of MAG Welding
안영호, 이종봉, 최원규
J Weld Join. 2001;19(5):38-43.   Published online October 25, 2001
PDFPDF    
A Study on the Temperature Distribution and Deformation of Case in Shrinkage Fit Process - Deformation Measurement and Deformation Analysis Model -
장경복, 정진우, 강성수, 최규원, 박찬우, 조상명
J Weld Join. 2001;19(5):44-50.   Published online October 25, 2001
PDFPDF    
A Study on the Mechanical Characteristics of the Resistance Multi-spot Welded Joints
방한서, 방희선
J Weld Join. 2001;19(5):51-57.   Published online October 25, 2001
PDFPDF    
Wear Resistance Characteristics of Iron Weld Overlays by Composite Chromium Powders
김종철, 박경채, 최창옥
J Weld Join. 2001;19(5):58-63.   Published online October 25, 2001
PDFPDF    
A Study on Durability of Sprayed Coating Layer in the Molten Zn-0.2%Al Alloys Bath
강태영, 임병문, 최장현, 김영식
J Weld Join. 2001;19(5):64-71.   Published online October 25, 2001
PDFPDF    
Characteristics of Sn-Pb Electroplating and Bump formation for Flip Chip Fabrication
황현, 홍순민, 강춘식, 정재필
J Weld Join. 2001;19(5):72-77.   Published online October 25, 2001
PDFPDF    
A Study of the Effects of Process Variables on Temperature and Magnetic-flux Distribution in Induction Heating of Steel Plate
배강열, 이태환, 양영수
J Weld Join. 2001;19(5):78-85.   Published online October 25, 2001
PDFPDF    
A Study on the Formation Mechanism of Microconstituents in Brazed Joint of Duplex Stainless Steel and Cr-Cu Alloy
김대업
J Weld Join. 2001;19(5):86-91.   Published online October 25, 2001
PDFPDF    
Wear Behavior of Plasma Transferred Arc Deposited Layers for Ni - and Co - base Alloy
윤병현, 이창희, 김형준
J Weld Join. 2001;19(5):92-99.   Published online October 25, 2001
PDFPDF    
A Study on the Measurement of Constraint Force of STS 304 Thin Plate Using the Load Cell
고준빈, 최원두, 이성구, 박성두, 이영호
J Weld Join. 2001;19(5):100-106.   Published online October 25, 2001
PDFPDF    
Information of New Welding Technology : Image Processing Method Using Integral Operator
편집부
J Weld Join. 2001;19(5):107-110.   Published online October 25, 2001
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI