Search

  • HOME
  • Search
Laser Cladding by Printing Si Powder Paste on A1050 Al Alloy Surface
Hyoung-Keun Lee
J Weld Join. 2018;36(1):57-64.   Published online January 26, 2018
Full textFull text    PubreaderPubReader    ePubePub    PDFPDF    
2031553
Effect of Hot-stamping on Microstructures and Tensile Properties of Al-Si Coated Boron Steel Welds with Laser Source
Myeong-Hwan Oh, Jong-Pan Kong, Min-Suck Kwon, Chung-Yun Kang
J Weld Join. 2013;31(6):96-106.   Published online January 21, 2014
PDFPDF    
2031635
A Study on the Weldability of Magnesium Alloy by Laser Heat Source (Ⅱ) - Mechanical Properties of laser-welded AZ31B-H24 and AZ31B-O -
Jung-Han Lee, Jong-Do Kim, Mun-Yong Lee
J Weld Join. 2012;30(6):56-61.   Published online December 23, 2012
PDFPDF    
A Study on the Weldability of Magnesium Alloy by Laser Heat Source (Ⅰ) ; Comparison on Laser Weldability of AZ31B-H24 and AZ31B-O
Jung-Han Lee, Jong-Do Kim, Mun-Yong Lee
J Weld Join. 2012;30(5):70-75.   Published online November 30, 2012
PDFPDF    
A Study on Weld Defect and Their Alternatives during Lap Welding of AZ31B Magnesium Alloy by Pulsed Nd: YAG Laser
Jong-Do Kim, Jung-Han Lee, Young-Sik Kim
J Weld Join. 2011;29(3):82-88.   Published online July 7, 2011
PDFPDF    
A Study of Weldability for Pure Titanium by Nd:YAG Laser(Ⅱ) - Welding Properties of Butt Welding
Jong-Do Kim, Myung-Sub Kwak, Moo-Keun Song, Seung-Ha Park
J Weld Join. 2009;27(6):68-73.   Published online January 13, 2010
PDFPDF    
Effect of Welding Speed on Mechanical Properties and Formability in Nd:YAG Laser Welds of 1000㎫ Grade DP Steel
Jin-Young Jang, Woo-Nam Choi, Byung-Hun Jung, Chung-Yun Kang
J Weld Join. 2009;27(2):69-75.   Published online May 18, 2009
PDFPDF    
Laser Welding of AZ31B-H24 Mg Alloy with AZ61 Filler Wire
Chung-Sun Ryu, Kook-Soo Bang, Mok-Young Lee, Woong-Sung Chang
J Weld Join. 2008;26(6):54-58.   Published online January 13, 2009
PDFPDF    
Investigation of Cutting Characteristics in the Sharp Corner for the Case of Cutting of Inconel 718 Super-alloy Sheet Using High-power CW Nd:YAG Laser
Dong-Gyu Ahn, Kyung-Won Byun
J Weld Join. 2008;26(5):90-96.   Published online November 12, 2008
PDFPDF    
A Study on the Welding Characteristics of Hastelloy C-276 using a Continuous Wave Nd:YAG Laser
Gee-Dae Na, Young-Tae Yoo, Ho-Jun Shin, Yong-Seok Oh
J Weld Join. 2008;26(5):49-59.   Published online November 12, 2008
PDFPDF    
A Study on the Process of Hybrid Welding Using Pulsed Nd:YAG Laser and Dip-transfer DC GMA Heat Sources
Won-Ik Cho, Suck-Joo Na
J Weld Join. 2007;25(5):71-77.   Published online January 28, 2008
PDFPDF    
Improvement of LBW quality of Zircaloy-4 Spacer Grids for PWR Fuel Assembly
Soo-Sung Kim, Kee-Nam Song, Hyoung-Jun Han
J Weld Join. 2006;24(5):22-28.   Published online January 4, 2007
PDFPDF    
Investigation of Cutting Characteristics in the Sharp Edge for the Case of Cutting of a Low Carbon Steel Sheet using High-power CW Nd:YAG Laser
Dong-Gyu Ahn, Young-Tae Yoo
J Weld Join. 2006;24(4):32-38.   Published online October 16, 2006
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI