Author index

  • HOME
  • BROWSE ARTICLES
  • Author index
Author     
Sang-Myung Cho 31 Articles
A Study on the Defect Detection Algorithm by Interval Statistical Processing Method of Arc Welding Waveform
Woo-Hyeon Ju, Hyeong-Chang Ryu, Kyeong-Seob Lim, Jong-Jung Lee, Yong-Hwan Park, Sang-Myung Cho
J Weld Join. 2021;39(1):74-80.   Published online February 3, 2021
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
A Study on the Measuring Method of Work Parameters to Evaluate the Skill of FCAW Welding Trainee
Woo Hyeon Ju, Hyeong Chang Ryu, Kyeong Seob Lim, Sang-Myung Cho
J Weld Join. 2020;38(3):295-299.   Published online June 8, 2020
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
A Study on Process Robustness of Lap Joint Fillet Welding in GTAW Using C Type Filler
Sang-Yeol Kim, Gi-Jeong Seo, Woo-Hyeon Ju, Sang-Myung Cho
J Weld Join. 2019;37(5):469-476.   Published online September 30, 2019
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
A Study on Deformation According to Welding Speed of Root Pass in GTAW Butt Joint Welding
Chang-Min Yu, Sang-Yeol Kim, Jung-Hyun Park, Gi-Jeong Seo, Sang-Myung Cho
J Weld Join. 2019;37(5):493-500.   Published online October 8, 2019
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
The Effect of Interpass Peening on Mechanical Properties in Additive Manufacturing of Ti-6Al-4V
Jae-Gyu Byun, Hui-jun Yi, Sang-Myung Cho
J Weld Join. 2017;35(2):6-12.   Published online April 28, 2017
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031757
Trend of Metal 3D Printing by Welding
Jae-Gyu Byun, Sang-Myung Cho
J Weld Join. 2016;34(4):1-8.   Published online August 23, 2016
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
A Study on Productivity Improvement in Narrow Gap TIG Welding
Jae-Ho Jun, Sung-Ryul Kim, Sang-Myung Cho
J Weld Join. 2016;34(1):68-74.   Published online February 29, 2016
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031694
A study of model for nitrogen permeation in TIG welding of super duplex stainless steel
Jae-Hyoung Lee, Byong-Ho Jung, Sang-Myung Cho, Jae-Ho Jun
J Weld Join. 2015;33(3):68-74.   Published online June 30, 2015
PDFPDF    
Method to Overcome Gap Variation by Control of Arc Force in Root Pass Welding for Back Bead by GMAW
Chang-Hee Son, Sang-Myung Cho
J Weld Join. 2011;29(6):77-81.   Published online January 20, 2012
PDFPDF    
A Study on Optimum Shape of Shield Gas Nozzle for Bead Shape Control in TIG Welding using Gas Force (Ⅰ) - Design and Performance Analysis of Venturi Nozzle
Hyo-Sik Ham, Ji-Seok Seo, Yoon-Hwan Choi, Yeon-Won Lee, Sang-Myung Cho
J Weld Join. 2011;29(3):51-57.   Published online July 7, 2011
PDFPDF    
A Study on Optimum Shape of Shield Gas Nozzle for Bead Shape Control in TIG Welding using Gas Force (Ⅱ) - Effect of Molten Metal Control by Venturi Nozzle in Overhead Position
Hyo-Sik Ham, Ji-Seok Seo, Yoon-Hwan Choi, Yeon-Won Lee, Sang-Myung Cho
J Weld Join. 2011;29(3):58-63.   Published online July 7, 2011
PDFPDF    
A Study on Tensile Properties and HAZ Softening Depending on the Amount of Heat Input in MIG Welding of Al6082-T6
Sang-Yeob Baek, Kyung-Do Park, Won-Il Kim, Sang-Myung Cho
J Weld Join. 2011;29(1):59-64.   Published online March 4, 2011
PDFPDF    
The Development of Welding Process to Prevent Porosity in MIG Welding of Al 6082-T6
Sang-Yeub Baek, Yon-Ho Jung, Won-Il Kim, Sang-Myung Cho
J Weld Join. 2010;28(6):28-34.   Published online January 10, 2011
PDFPDF    
Control of Molten Pool by Physical Force of Bead Former in TIG Welding of Overhead and Inclined-up Position
Hyo-Sik Ham, Jong-Moon Ha, Byung-Woo Lee, Sang-Myung Cho
J Weld Join. 2010;28(6):21-27.   Published online January 10, 2011
PDFPDF    
A Study on Assessment Method of Crack Resistance and Thermal Shock Resistance in Hardfacing for Hot Forging Die
Sang-Myung Cho, Sung-Ho Kim, Yun-Ho Jung et al.
J Weld Join. 2010;28(3):79-85.   Published online August 2, 2010
PDFPDF    
A Study on the Development of Arc Length Estimation Method in FCAW
Kwang-Moo Bae, Sang-Myung Cho
J Weld Join. 2009;27(3):67-72.   Published online July 6, 2009
PDFPDF    
A Study on the Buckling in Fillet Welds of Sheets
Hwan-Su Chu, Sang-Myung Cho
J Weld Join. 2009;27(3):60-66.   Published online July 6, 2009
PDFPDF    
Development and Strength Evaluation of Ring Projection Welding Process of the Microminiature Tube and Tubesheet
Young-hyun Yun, Hyun-joon Kim, Chang-soo Kim, Sang-myung Cho
J Weld Join. 2009;27(2):63-68.   Published online May 18, 2009
PDFPDF    
Effect of Heat Flux on the Melting Efficiency and Penetration Shape in TIG Welding
Dong-Soo Oh, Sang-Myung Cho
J Weld Join. 2009;27(2):44-50.   Published online May 18, 2009
PDFPDF    
A Study on Back Bead Formation in Inclined-up Position of Plasma Arc Orbital Welding
Hyo-Won Kim, Sang-Myung Cho
J Weld Join. 2009;27(1):71-78.   Published online March 12, 2009
PDFPDF    
The Eeffect of Arc Length and Shield Gas on Penetration Aspect Ratio in A-TIG Welding
In-Ki Park, Hyo-Sik Ham, Sang-Myung Cho
J Weld Join. 2008;26(6):42-47.   Published online January 13, 2009
PDFPDF    
Development of GMAW Process with Twin Torch for Wide Overlay using Compound Filler Plate
Kyu-Min Hwang, Sung-Deok Kim, Byung-Ho Jung, Sang-Myung Cho
J Weld Join. 2008;26(4):44-49.   Published online September 24, 2008
PDFPDF    
Development of Twin Torch Compound Metal Arc Welding Process to Form for Wide Hardfacing Bead of Wearplate
Sang-Myung Cho, Sung-Deok Kim, Kyu-Min Hwang
J Weld Join. 2008;26(2):50-54.   Published online June 18, 2008
PDFPDF    
The Effects of Start Block and Arc Length on Melt Through and Unmelted Zone at Welding Start in High Speed Plasma Arc Welding of Thin Plate
Yong-Su Chu, Seong-Joon Hong, Jae-Pil Jung, Sang-Myung Cho
J Weld Join. 2008;26(2):92-97.   Published online June 18, 2008
PDFPDF    
Effect of He Mixing Ratio on the Characteristic of TIG Welding with High Current and High Speed
Dong-Soo Oh, Yeong-Sik Kim, Sang-Myung Cho
J Weld Join. 2005;23(3):54-60.   Published online July 15, 2005
PDFPDF    
The Characteristics on Arc Pressure Distribution of TIG Welding with Shield Gas Mixing Ratio
Dong-Soo Oh, Teong-Sik Kim, Sang-Myung Cho
J Weld Join. 2005;23(1):41-47.   Published online April 29, 2005
PDFPDF    
The Waveform Control and Blowhole Generation in the Wave Pulse MIG Welding for Galvanized Steel Sheets
Sang-Myung Cho, Ki-Jung Kim, Byung-Woo Lee
J Weld Join. 2005;23(1):69-76.   Published online April 29, 2005
PDFPDF    
The Effects of the Arc Pressure Variation on the Penetration by the Filler Wire Feed Wire Feed Rate in Pulsed TIG Welding
Sang-Myung Cho, Jin-Woo Kim
J Weld Join. 2004;22(1):71-76.   Published online March 12, 2004
PDFPDF    
Waveform Analysis for Quality Improvement of Arc Welding in Automobile Industries
Sang-myung Cho
J Weld Join. 2003;21(7):27-33.   Published online December 25, 2003
PDFPDF    
Development of Mash-Seam Welding Process by Flat Electrode Continuous Welding
Sang-Myung Cho, Ho-Jae Cho
J Weld Join. 2003;21(5):35-39.   Published online September 25, 2003
PDFPDF    
The Arc Brazing by Variable Polarity AC Pulse MIG Welding Machine
Sang-Myung Cho, Hyun-Sang Kong
J Weld Join. 2003;21(4):56-62.   Published online August 25, 2003
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2022 by The Korean Welding and Joining Society.

Developed in M2PI