Author index

  • HOME
  • BROWSE ARTICLES
  • Author index
Author     
Gyubaek An 14 Articles
Residual Stress and Deformation Characteristics by FSW and SAW of Wear Resistant Steel
Jeongung Park, Gyubaek An, Dusan Kim
J Weld Join. 2022;40(2):133-140.   Published online April 21, 2022
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2032202
Evaluation of Welding Residual Stress Characteristics of High-Strength Steel for Offshore Structures Based on Constraint Effect
Daehee Seong, Gyubaek An, Jong-ung Park
J Weld Join. 2022;40(1):16-21.   Published online February 28, 2022
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2032123
A Study of Brittle Crack Arrestability Test Method
Gyubaek An, Hong-Yeol Bae, Jeong-Ung Park
J Weld Join. 2020;38(6):535-542.   Published online December 29, 2020
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2032057
Evaluation of Fracture Safety According to Plastic Deformation with High Strength Steel Weld Joints
Gyubaek An, Jeongung Park, Mituru Ohata, Fumiyoshi Minami
J Weld Join. 2019;37(6):547-554.   Published online December 18, 2019
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2032058
Fracture Characteristics of Cryogenic Steel Using Weibull Stress Analysis
Jeongung Park, Gyubaek An
J Weld Join. 2019;37(6):531-538.   Published online December 27, 2019
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031987
Characteristic of Welding Rotational Deformation in Laser Welding of Thin Steel Sheet
Jeong-Ung Park, Jong-Bong Lee, Gyubaek An, Sang-min Kim, Hwan-woong Seo
J Weld Join. 2018;36(6):1-7.   Published online December 3, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031991
Brittle Crack Propagation Path Due to the Effect of Welding Residual Stresses
Gyubaek An, Hongyeol Bae, Jeongung Park, Wan Chuck Woo
J Weld Join. 2018;36(6):21-27.   Published online December 13, 2018
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031893
A Basic Study on Brittle Crack Propagation Path with Ultra Large Steel Plate Weld Joints
Gyubaek An, Illwook Han, Jeongung Park, Wan Chuck Woo
J Weld Join. 2017;35(6):15-20.   Published online December 8, 2017
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031894
Prediction and Welding sequence of Minimum Welding Deformation in Large Steel Block Welding
Jeong-ung Park, Gyubaek An, Seung-hyun Yang
J Weld Join. 2017;35(6):8-14.   Published online December 12, 2017
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
Identification of Correlation Between Fracture Toughness Parameters of Cryogenic Steel Weld Joints
Gyubaek An, Seunglae Hong, Jeongung Park, Chanseung Ro, Ilwook Han
J Weld Join. 2017;35(3):82-87.   Published online June 30, 2017
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031663
Design for avoid unstable fracture in shipbuilding and offshore plant structure
Gyubaek An, Hong-Yeol Bae, Byung-Doo Noh et al.
J Weld Join. 2015;33(1):35-40.   Published online February 28, 2015
PDFPDF    
Development Trends of Steel Plates for Ship Building and Off-Shore Construction and It’s Weldability
IlWook Han, YoungHwan Park, GyuBaek An, YoungHo An
J Weld Join. 2009;27(1):25-33.   Published online March 12, 2009
PDFPDF    
Crack Arrest Toughness of Thick Steel Plate Welds for Ship Building
JoonSik Park, BoYoung Jung, GyuBaek An, JongBong Lee
J Weld Join. 2007;25(4):9-14.   Published online September 21, 2007
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2022 by The Korean Welding and Joining Society.

Developed in M2PI