Author index

  • HOME
  • BROWSE ARTICLES
  • Author index
Author     
Dong-Ju Lee 9 Articles
A Study on Fatigue Crack Growth Parameters for Fatigue Life Assessment based on Fracture Mechanics
Hyeon-Su Kim, Tae-Jong Park, Dong-Ju Lee, Sang-Beom Shin, Myung-Hyun Kim
J Weld Join. 2017;35(1):61-67.   Published online February 28, 2017
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
2031788
Trail Rolling Method for Control of Buckling Distortion in AA5083 GMA Butt Weldment
DONG-JU LEE, SANG-BEOM SHIN
J Weld Join. 2016;34(6):20-27.   Published online December 29, 2016
Full textFull text    PubreaderPubReader    ePubePub    CrossRef-TDMCrossref - TDM    PDFPDF    
A Study on Welding Distortion and Residual Stress for Tubular Welded Joint
Hyung-Kook Jin, Sang-Beom Shin, Dong-Ju Lee, Dong-Hwan Park
J Weld Join. 2012;30(5):51-56.   Published online November 30, 2012
PDFPDF    
Behavior of Global Bending Distortion of Hatch-cover in Container Carrier during Fabrication Process
Dong-Ju Lee, Gyung-Gyu Kim, Sang-Beom Shin
J Weld Join. 2010;28(4):41-48.   Published online September 8, 2010
PDFPDF    
A Study on the Predicting Transverse Residual Stress at the Ultra Thick FCA Butt Weldment of Hatch Coaming in a Large Container Vessel
Sang-Beom Shin, Dong-Ju Lee, Joo-Sung Lee
J Weld Join. 2010;28(4):33-40.   Published online September 8, 2010
PDFPDF    
A Study on the Evaluation of Transverse Residual Stress at the Multi-pass FCA Butt Weldment using FEA
Sang-Beom Shin, Dong-Ju Lee, Dong-Hwan Park
J Weld Join. 2010;28(4):26-32.   Published online September 8, 2010
PDFPDF    
A Study on the Distortion Control Characteristics of the STS 304 Multi-pass Butt Weldment by Tensioning Method
Ha-Geun Kim, Dong-Ju Lee, Sang-Beom Shin
J Weld Join. 2010;28(3):73-78.   Published online August 2, 2010
PDFPDF    
Effect of Distance and Restraint Degree between Fillet and Butt Weldment on Residual Stress Redistribution at each Weldment
Hyung-Kook Jin, Dong-Ju Lee, Sang-Beom Shin
J Weld Join. 2010;28(3):59-64.   Published online August 2, 2010
PDFPDF    
Evaluation of Buckling Distortion for the Thin Panel Welded Structure According to Welding Processes
Sang-Beom Shin, Dong-Ju Lee, Joo-sung Lee
J Weld Join. 2008;26(3):23-29.   Published online July 31, 2008
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2022 by The Korean Welding and Joining Society.

Developed in M2PI