JWJ > Volume 26(2); 2008 > Article
Journal of KWJS 2008 April;26(2) :69-74.
Published online June 18, 2008.
Effects of Welding Parameters on Weld Metal Strength and Recovery of Alloying Elements in FCAW
Dong-Hee Jung, Kook-Soo Bang, Chan Park, Woong-Sung Chang, Chul-Gyu Park




Correspondence:   Published online June 18, 2008
ABSTRACT
  590㎫ grade weldable steels were gas metal arc welded with flux cored wires. Welding parameters such as current, voltage, and speed were varied independently. Effects of each parameter on the strength and chemical composition of weld metal were investigated. Increase of voltage caused decrease of weld metal tensile strength due to the low recovery of alloying elements such as carbon and manganese. On the contrary, increase of current and speed resulted in increase of weld metal strength because of higher recovery of the alloying elements.
Keywords: FCAW;Welding parameter;Tensile strength;Recovery of elements
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
705
View
0
Download
Related articles
Effects of Fluoride in the Flux on Hydrogen Content in Weld Metal and Operating Behavior in FCAW-S  2017 October;35(5)
Influence of Welding Parameters on Macrostructure and Mechanical Properties of Friction-Stir-Spot-Welded 5454-O Aluminum Alloy Sheets  2011 December;29(6)
The Effects of Welding Parameters on the Weld Shape in Pulsed GTA Welding of a STS304L Stainless Steel Capsule  2007 October;25(5)
Effects of Hybrid Welding Parameters on the Toughness of Weld Metal in Ship Structural Steel  2006 December;24(6)
Effects of Welding Parameters on the Friction Stir Weldability of 5052 AI alloy  2004 June;22(3)
Effects of Fluoride in the Flux on Hydrogen Content in Weld Metal and Operating Behavior in FCAW-S  2017 October;35(5)
Influence of Welding Parameters on Macrostructure and Mechanical Properties of Friction-Stir-Spot-Welded 5454-O Aluminum Alloy Sheets  2011 December;29(6)
The Effects of Welding Parameters on the Weld Shape in Pulsed GTA Welding of a STS304L Stainless Steel Capsule  2007 October;25(5)
Effects of Hybrid Welding Parameters on the Toughness of Weld Metal in Ship Structural Steel  2006 December;24(6)
Effects of Welding Parameters on the Friction Stir Weldability of 5052 AI alloy  2004 June;22(3)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of KWJS for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of KWJS e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of KWJS e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
The Korea Science and Technology Building, New B/D, Room 503
Teheran-ro 7-gil, 22(635-4, Yeoksam-Dong), Gangnam-gu, Seoul 06130, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.