Advanced Search  
JWJ > Volume 25(2); 2007 > Article
Journal of KWJS 2007 April;25(2) :55-61.
Published online May 17, 2007.
Mechanical Properties of the Flash Butt Welded Joint of 590MPa High Strength Steel
Boyoung Jeong, In-Su Woo, Jeong-Kil Kim, Jong-Bong Lee



Correspondence:   Published online May 17, 2007
ABSTRACT
  Flash butt weldability of 590㎫ dual phase steel is carried out under micro metallographical examination and macro mechanical property tests. The objective of present study is to investigate the cause that brings on bond line fracture, and is to improve mechanical properties of the flash butt welded joint. The joint of flash butt welding has a superior tensile property, but has bad formability due to oxide formed at bond interface. The HAZ softening in the weld joint does not show. It was found that mechanical properties were increased with optimizing welding parameters and making application of oil dripping and post-weld heat treatment.
Keywords: Flash butt welding;DP steel;Tensile strength;Erichsen test
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
1,607
View
0
Download
Related articles
Microstructure and Mechanical Properties in the Welds of Reduced-Activation Ferritic/Martensitic Steels  2018 February;36(1)
Microstructure and Mechanical Properties of Reheated Zones in the Multi-pass Weld Metal of High-Strength Steel  2017 December;35(6)
A Study on Laser Welding of the Seat Back Frame Applied by High Strength Steels   2017 June;35(3)
Effects of Brazing Current on Mechanical Properties of Gas Metal Arc Brazed Joint of 1000MPa Grade DP Steels  2017 April;35(2)
Effects of Heat Inputs on the Mechanical Properties of FCA Weldment of YP 690MPa Grade Steels  2016 December;34(6)
Microstructure and Mechanical Properties in the Welds of Reduced-Activation Ferritic/Martensitic Steels  2018 February;36(1)
Microstructure and Mechanical Properties of Reheated Zones in the Multi-pass Weld Metal of High-Strength Steel  2017 December;35(6)
A Study on Laser Welding of the Seat Back Frame Applied by High Strength Steels   2017 June;35(3)
Effects of Brazing Current on Mechanical Properties of Gas Metal Arc Brazed Joint of 1000MPa Grade DP Steels  2017 April;35(2)
Effects of Heat Inputs on the Mechanical Properties of FCA Weldment of YP 690MPa Grade Steels  2016 December;34(6)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of KWJS for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of KWJS e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of KWJS e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
#304, San-Jeong Building,
23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.