Advanced Search  
JWJ > Volume 24(1); 2006 > Article
Journal of KWJS 2006 February;24(1) :71-76.
Published online April 3, 2006.
[Research Papers] Joint Characteristics of Spot Friction Stir Welded A 5052 Alloy Sheet
Yun-Mo Yeon, Won-Bae Lee, Chang-Yong Lee, Seung-Boo Jung, Keun Song




Correspondence:   Published online April 3, 2006
ABSTRACT
In this study, the microstructure and mechanical properties of spot friction stir welded A 5052 alloy were investigated. Especially, the effect of insertion depth of welding tool on microstructural changes and mechanical properties was investigated in order to obtain the optimum spot friction stir welding condition. The lap shear load of spot friction stir welded A 5052 alloy plates showed lower value at the shallowest insertion depth and increased with tool insertion depth. At 1.6㎜, the maximum value of 3.35 kN was obtained, and then dropped to lower load when the insertion depth was deeper. Spot friction stir welded joints showed shear fracture mode at shallower insertion depths and fracture mode changed to plug fracture mode as the insertion depth was deeper.
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
CrossRef TDM  CrossRef TDM
  E-Mail
Share:      
METRICS
1,149
View
0
Download
Related articles
Microstructure and Mechanical Properties in the Friction Stir Welded C70600 Alloy  2018 April;36(2)
Research on Mechanical Properties and Characteristics of Hybrid Composites for Boat  2016 April;34(2)
Researches in Corrosion Resistance of Friction Stir Welded Aluminum alloys  2013 April;31(2)
Patterns and Characteristics of Fatigue Failure in Cruciform Fillet Weld Joint  2011 August;29(4)
Effects of Tool Speed on Joining Characteristics during Friction Stir Spot Welding of Mg-alloy(AZ31B) Sheet  2011 April;29(2)
Microstructure and Mechanical Properties in the Friction Stir Welded C70600 Alloy  2018 April;36(2)
Research on Mechanical Properties and Characteristics of Hybrid Composites for Boat  2016 April;34(2)
Researches in Corrosion Resistance of Friction Stir Welded Aluminum alloys  2013 April;31(2)
Patterns and Characteristics of Fatigue Failure in Cruciform Fillet Weld Joint  2011 August;29(4)
Effects of Tool Speed on Joining Characteristics during Friction Stir Spot Welding of Mg-alloy(AZ31B) Sheet  2011 April;29(2)
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of KWJS for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of KWJS e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of KWJS e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
#304, San-Jeong Building,
23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.           Developed in M2PI