Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-04.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Study of Metal(Au) Bump for Transverse Ultrasonic Bonding
  • Search
  • Advanced Search
Journal of KWJS 2011;29(1):52-58.
Published online March 4, 2011.
금속(Au)범프의 횡초음파 접합 조건 연구
, , ,
 
Study of Metal(Au) Bump for Transverse Ultrasonic Bonding
Myeong-Gu Ji, Chun-Sam Song, Joo-Hyun Kim, Jong-Hyeong Kim
Abstract
  In this paper, the direct bonding process between FPCB and HPCB was studied. By using an ultrasonic horn which is mounted on the ultrasonic bonding machine, it is alternatively possible to bond the gold pads attached on the FPCB and HPCB at room temperature without an adhesive like ACA or NCA. The process condition for obtaining more bonding strength than 0.6 Kgf, which is commercially required, was carried out as 40 ㎑ of frequency, 0.6 ㎫ of bonding pressure and 2 second of bonding time. The peel off test was performed for evaluating bonding strength which results in more than 0.8 Kgf.
Key Words: Ultrasonic bonding, Bump direct bonding, FPCB, Au to Au bonding, Display module bonding
TOOLS
METRICS Graph View
  • 1,687 View
  • 0 Download
Related articles

Design of Bar Horn for Ultrasonic Bonding2009 October;27(5)

Design of Cylinder Horn for Ultrasonic Welding2009 August;27(4)

ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI