Warning: fopen(/home/virtual/kwjs/journal/upload/ip_log/ip_log_2024-03.txt): failed to open stream: Permission denied in /home/virtual/lib/view_data.php on line 88 Warning: fwrite() expects parameter 1 to be resource, boolean given in /home/virtual/lib/view_data.php on line 89 Modeling Techniques using Virtual Fixture for Analysing the Shrinkage of Axi-symmetric Welded Structures

Journal of KWJS 2010;28(2):60-65.
Published online May 13, 2010.
가상 고정물을 이용한 축 대칭 용접물의 용접 변형 해석 모델링 기법
, , ,
 
Modeling Techniques using Virtual Fixture for Analysing the Shrinkage of Axi-symmetric Welded Structures
Ho-Jin Lee, Bong-Sang Lee, In-Chul Jung, Deog-Nam Shim
Abstract
  Although two dimensional axi-symmetric modeling is useful for calculating the residual stresses of a cylindrical weldment such as a core barrel, this conventional axi-symmetric modeling can not express the behavior of shrinkage well in the locally heated weld zone. New technique of two dimensional axi-symmetric modeling using a virtual fixture is suggested to simulate the behavior of dimensional changes in the weld zone during the heating period of the welding. The virtual fixture in the model has a role to restrain the expansion of the high temperature heated region, which simulates equivalent intrinsic restraint effect of the weldment. In the restraint condition of the virtual fixture above the critical yield strength, the calculated shrinkages by using the suggested axi-symmetric model agreed well with those measured in a welded mock-up. The calculated residual stresses by using the suggested axi-symmetric model also agreed well with those calculated by using conventional axi-symmetric model which has been used for calculating residual stresses in the weldment.
Key Words: Core barrel, Axi-symmetric modeling, Virtual fixture, Shrinkage, Residual stress


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI