 |
|
Solidification Cracking Susceptibility of the Weld Metal of Additively Manufactured 316L Stainless Steel
So-Young Park, Yongjoon Kang, Dongjin Oh, Sangwoo Song, Hyun-Uk Hong
J Weld Join. 2021;39(1):45-50. Published online 2021 Feb 1 DOI: https://doi.org/10.5781/JWJ.2021.39.1.5
|
|
Citations to this article as recorded by
 Severe Mn vaporization for partial-penetrated laser keyhole welds of high-manganese cryogenic steel
Myeonghwan Choi, Dae-Won Cho, Kwang-Hyeon Lee, Seonghoon Yoo, Sangyong Nam, Namhyun Kang
International Journal of Heat and Mass Transfer.2024; 227: 125567. CrossRef Quantifying Susceptibility to Solidification Cracking in Oscillated CM247LC Superalloy Welds via Varestraint Testing
Kyeong-Min Kim, Uijong Lee, Hyungsoo Lee, Seong-Moon Seo, Eun-Joon Chun
Metals and Materials International.2023; 29(3): 777. CrossRef Machine Learning Approach for the Prediction of Defect Characteristics in Wire Arc Additive Manufacturing
Muralimohan Cheepu
Transactions of the Indian Institute of Metals.2023; 76(2): 447. CrossRef Characterization of Microstructural Anisotropy in 17–4 PH Stainless Steel Fabricated by DMLS Additive Manufacturing and Laser Shot Peening
Venu Kumar Sarila, Syed Quadir Moinuddin, Muralimohan Cheepu, Hamshini Rajendran, Venkata Charan Kantumuchu
Transactions of the Indian Institute of Metals.2023; 76(2): 403. CrossRef Numerical Simulations of the Effect of Heat Input on Microstructural Growth for MIG-Based Wire Arc Additive Manufacturing of Inconel 718
Muralimohan Cheepu, Venkata Charan Kantumuchu
Transactions of the Indian Institute of Metals.2023; 76(2): 473. CrossRef Wear and Microstructural Characteristics of Colmonoy-4 and Stellite-6 Additive Layer Deposits on En19 Steel by Laser Cladding
Venu Kumar Sarila, Harisivasri Phanindra Koneru, Venkateswar Reddy Pathapalli, Muralimohan Cheepu, Venkata Charan Kantumuchu
Transactions of the Indian Institute of Metals.2023; 76(2): 457. CrossRef Fatigue Life and Crack Initiation in Monopile Foundation by Fatigue FE Analysis
Zhen-Ming Wang, Kyong-Ho Chang, Shazia Muzaffer, Mikihito Hirohata
Processes.2023; 11(5): 1317. CrossRef Gas tungsten arc weldability of stainless steel 304 using CoCrFeMnNi filler metals for cryogenic applications
Hyunbin Nam, Byungrok Moon, Sangwon Park, Namkyu Kim, Sangwoo Song, Nokeun Park, Youngsang Na, Namhyun Kang
Science and Technology of Welding and Joining.2022; 27(1): 33. CrossRef Effect of filler materials on dissimilar TIG welding of Inconel 718 to high strength steel
Anuradha M., Chittaranjan Das Vemulapalli, Muralimohan Cheepu
Materials Today: Proceedings.2022; 52: 1314. CrossRef Alloy design of Ni-based superalloy with high γ′ volume fraction suitable for additive manufacturing and its deformation behavior
Ji-Un Park, Sun-Young Jun, Bong Ho Lee, Jae Hoon Jang, Byoung-Soo Lee, Hae-Jin Lee, Je-Hyun Lee, Hyun-Uk Hong
Additive Manufacturing.2022; 52: 102680. CrossRef Fatigue Life Evaluation of Tripod Offshore Structure Using 3D Fatigue FE Analysis
Shazia Muzaffer, Kyong-Ho Chang, Wang-Sub Shin
International Journal of Steel Structures.2022; 22(6): 1634. CrossRef Vaporization Modeling and Experimental Verification During Laser Beam Welding for 24Mn Steel
Myeonghwan Choi, Daewon Cho, Namhyun Kang
Journal of Welding and Joining.2022; 40(6): 457. CrossRef T-joint Fillet Laser Welding of High-Strength Stainless Steel for Curtain Wall Frames
Gitae Park, Seunggab Hong, Kyongyun Yeau, Boyoung Jeong
Journal of Welding and Joining.2022; 40(6): 485. CrossRef Effect of Laser Traverse Speed on the Metallurgical Properties of Fe-Cr-Si Clads for Austenitic Stainless Steel Using Directed Energy Deposition
Taewoo Hwang, Gi-Dong Kim, Seo-Wan Kim, Young Moon, Hyunbin Nam, Sangwoo Song
Crystals.2022; 12(11): 1531. CrossRef
|