Previous issues

  • HOME
  • BROWSE ARTICLES
  • Previous issue
Volume 23(6); Dec 2005
Standardization for Temperature Distribution Prediction of the Arc Weld using FEA
J Weld Join. 2005;23(6):1-7.   Published online January 26, 2006
PDFPDF    
Review on the International Joint Researches for Evaluation of Welding Residual Stresses
Jong-Sung Kim, June-Soo Park, Tae-Eun Jin
J Weld Join. 2005;23(6):8-17.   Published online January 26, 2006
PDFPDF    
General Guide for Hot Spot Stress Analysis
J Weld Join. 2005;23(6):18-28.   Published online January 26, 2006
PDFPDF    
A Review on the International Effects for the Fatigue Strength Assessment of Welded Structures
Myung-Hyun Kim, Yoo-Il Kim
J Weld Join. 2005;23(6):29-36.   Published online January 26, 2006
PDFPDF    
Characteristics of Fatigue Crack Propagations with Respect to Loading Directions in Butt-Welded Steel Plates with the Same Direction of Rolling and Welding Bead
Yong-Bok Lee, Sung-Yeup Kim, Byung-Duck Oh
J Weld Join. 2005;23(6):37-42.   Published online January 26, 2006
PDFPDF    
Laser Welding of Seal Tube for Instrumented Irradiation Fuel Test
Soo-Sung Kim, Chul-Yong Lee, Woong-Ki Kim, Geun-Il Park, Jinh-Yun Koh, Jun-Seok Seo
J Weld Join. 2005;23(6):43-48.   Published online January 26, 2006
PDFPDF    
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 1 - Determination of Process Parameters
Sang-Min Lee, Jin-Beom Kim, Suck-Joo Na
J Weld Join. 2005;23(6):49-54.   Published online January 26, 2006
PDFPDF    
A Study on the Resistance Welding of Metallic Sandwich Panel : Part 2 - Process Analysis
Sang-Min Lee, Jin-Beom Kim, Suck-Joo Na
J Weld Join. 2005;23(6):55-60.   Published online January 26, 2006
PDFPDF    
Evaluation of Creep Crack Growth Failure Probability at Weld Interface Using Monte Carlo Simulation
Jin-Sang Lee, Kee-Bong Yoon
J Weld Join. 2005;23(6):61-66.   Published online January 26, 2006
PDFPDF    
Effect of Spew Fillet on Failure Strength Properties of Natural Fiber Reinforced Composites Including Adhesive Bonded Joints
Ho-Chel Yoon, Jun-Yong Choi, Yon-Jig Kim, Jae-Kyoo Lim
J Weld Join. 2005;23(6):67-71.   Published online January 26, 2006
PDFPDF    
The Evaluation of STS304 Coating Layer on S45C Substrate by Friction Surfacing Process
Joong-Suk Noh, Houn-Jin Cho, Heung-Ju Kim, Chang-Gun Chun, Woong-Seong Chang
J Weld Join. 2005;23(6):72-76.   Published online January 26, 2006
PDFPDF    
Low Temperature Bonding Process of Silicon and Glass using Spin-on Glass
Jae-Hak Lee, Choong-Don Yoo
J Weld Join. 2005;23(6):77-86.   Published online January 26, 2006
PDFPDF    
Evaluation of Notch Location Effect on Ductile Crack Initiation at Strength Mismatched Joints by Finite Element Method and Ultrasonic-Mechatronics System
Gyu-Baek An, Han-Sur Bang, Masao Toyoda
J Weld Join. 2005;23(6):87-92.   Published online January 26, 2006
PDFPDF    
A Characteristics of Zn-Al-Cu System Pb-free Solder Alloys for Ultra High Temperature Applications
Seong-Jun Kim, Hye-Seong Na, Tae-Kyo Han, Bong-Keun Lee, Chung-Yun Kang
J Weld Join. 2005;23(6):93-98.   Published online January 26, 2006
PDFPDF    
The Mixing Ratio Effect of Insert Metal Powder and Insert Brazing Powder on Microstructure of the Region Brazed on DS Ni Base Super Alloy
Chang-Ho Ye, Bong-Keun Lee, Woo-Young Song, In-Seok Oh, Chung-Yun Kang
J Weld Join. 2005;23(6):99-105.   Published online January 26, 2006
PDFPDF    
대한용접학회지 제23권 총목차
편집부
J Weld Join. 2005;23(6):106-109.   Published online January 26, 2006
PDFPDF    
대한용접학회지 집필규정 외
편집부
J Weld Join. 2005;23(6):110-117.   Published online January 26, 2006
PDFPDF    
[학회소식]
편집부
J Weld Join. 2005;23(6):118-130.   Published online January 26, 2006
PDFPDF    
[회원사동정]
편집부
J Weld Join. 2005;23(6):131-136.   Published online January 26, 2006
PDFPDF    

Journal of
Welding and
Joining

Print ISSN: 2466-2232
Online ISSN: 2466-2100

Register for e-submission  Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Register for e-submission  Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at https://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system.
For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Register for e-submission  Free archive
Anyone may access any past or current articles without logging in.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY 
FOR CONTRIBUTORS
Editorial Office
#304, San-Jeong Building, 23, Gukhoe-daero 66-gil, Yeongdeungpo-gu, Seoul 07237, Korea
Tel: +82-2-538-6511    Fax: +82-2-538-6510    E-mail: koweld@kwjs.or.kr                

Copyright © 2024 by The Korean Welding and Joining Society.

Developed in M2PI