Advanced Search  
  Previous issue

Table of Contents | February, 1997  Vol. 15  No.1 Previous Issue | Next Issue | Archive
In this issue:

9 Analysis of Restraint Stress Acting on the Weldment
신상범, 윤중근
Journal of Welding and Joining:9-14.  Publication Date (Web): February 25, 1997
PDF Links
 
15 Residual Stress , Distortion , and Fracture Analysis of Welded Structures using Finite Element Method
심용래
Journal of Welding and Joining:15-25.  Publication Date (Web): February 25, 1997
PDF Links
 
26 Numerical Analysis of Weldment by Considering the Convection of Welding Arc and Weld Pool
김원훈, 나석주
Journal of Welding and Joining:26-35.  Publication Date (Web): February 25, 1997
PDF Links
 
36 Welding Technology for the Process Optimization by the Computer Code SYSWELD
이재경, 이기훈
Journal of Welding and Joining:36-45.  Publication Date (Web): February 25, 1997
PDF Links
 
46 A Study on the Stress Corrosion Cracking Evaluation for Weld Joint of TMCP Steel by SP-SSRT Method
유효선, 정희돈, 유대영, 정세희
Journal of Welding and Joining:46-54.  Publication Date (Web): February 25, 1997
PDF Links
 
55 Stress Intensity Factor for the Cracked Sheet Subjected to Normal Stress and Reinforced with a Plate by Spot Welding
이강용, 김옥환
Journal of Welding and Joining:55-65.  Publication Date (Web): February 25, 1997
PDF Links
 
66 Development of an Effective Arc Sensing Algorithm for Seam-Tracking in Flux-Cored Arc Welding Process for Horizontal Fillet Joints .
권순창, 최재성, 장낙영
Journal of Welding and Joining:66-80.  Publication Date (Web): February 25, 1997
PDF Links
 
81 A Study on Automatic Seam Tracking System Using Electro-magnetic Sensor for Sheet Metal Arc Welding of Butt Joints
유병희, 김재웅
Journal of Welding and Joining:81-91.  Publication Date (Web): February 25, 1997
PDF Links
 
92 Effect of HAZ Softening Zone on Creep Rupture Propertes of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part I : Creep Rupture Life -
오영근, J.E. Indacochea
Journal of Welding and Joining:92-100.  Publication Date (Web): February 25, 1997
PDF Links
 
101 Effect of HAZ Softening Zone on Creep Rupture Propertes of 1.0Cr-1.0Mo-0.25V Turbine Rotor Steels - Part II : Carbide Morphology -
오영근, J.E. Indacochea
Journal of Welding and Joining:101-108.  Publication Date (Web): February 25, 1997
PDF Links
 
109 Effect of Shielding gas Composition on Arc Stability and Transfer mode of High deposition GMA Welding
경규담, 천홍정, 이정헌, 강봉용, 김희진
Journal of Welding and Joining:109-115.  Publication Date (Web): February 25, 1997
PDF Links
 
116 Improvement of Powder Feeding Characteristics of Fine ( 5 μm ) Al2O3 Powder by Modification of the Powder Feeding Systems and Characterization of the Coating Layer depending on Plasma Spraying Conditions
설동욱, 김병희, 정민석, 임영우, 서동수
Journal of Welding and Joining:116-124.  Publication Date (Web): February 25, 1997
PDF Links
 
125 Optimization of HVOF Spray Parameters for Cr3C2-7wt%NiCr Coating Powder by Experimental Design Method
김병희, 서동수
Journal of Welding and Joining:125-134.  Publication Date (Web): February 25, 1997
PDF Links
 
135 A Study on the Surface Hardening of Aluminum Alloy - TIG Overlay Hardening of Al 503 -
이영호, 강원석, 이규천
Journal of Welding and Joining:135-148.  Publication Date (Web): February 25, 1997
PDF Links
 
e-submission
endonote style file
JWJ
vol: Issue: Page:
e-sciencecentral
Register for e-submission
Register here to access the e-submission system of Journal of Welding and Joining for authors and reviewers.
Manuscript Submission
To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.
Free archive
Anyone may access any past or current articles without logging in.
Editorial Office
The Korea Science and Technology Building, New B/D, Room 503
Teheran-ro 7-gil, 22(635-4, Yeoksam-Dong), Gangnam-gu, Seoul 06130, Korea
TEL : +82-2-538-6511    FAX : +82-2-538-6510   E-mail: koweld@kwjs.or.kr
Browse Articles |  Current Issue |  For Authors and Reviewers |  About
Copyright© by The Korean Welding and Joining Society. All right reserved.