:: Journal of Welding and Joining (JWJ) ::

JWJ Search

Laser Cladding by Printing Si Powder Paste on A1050 Al Alloy Surface (Research Paper)

Hyoung-Keun Lee

Journal of Welding and Joining:57-64. Publication Date (Web): January 26, 2018

DOI: https://doi.org/10.5781/JWJ.2018.36.1.7

A Review of Joining Processes for High Strength 7xxx Series Aluminum Alloys (Research Paper)

Minjung Kang, Cheolhee Kim

Journal of Welding and Joining:79-88. Publication Date (Web): November 20, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.6.12

The Changes of Chemical Composition and Microstructure in Electroslag Cladding Overlays by using AISI 430 Stainless Steel Strip (Research Paper)

Jae-Young Jung, Tae-Kwon Ha

Journal of Welding and Joining:48-56. Publication Date (Web): September 13, 2017 Cited by 3

DOI: https://doi.org/10.5781/JWJ.2017.35.5.7

MIG Welding Optimization of Muffler Manufacture by Microstructural Change and Thermal Deformation Analysis (Research Paper)

Seung Ho Lee, Eok Soo Kim, Jin-Young Park, Jun Choi

Journal of Welding and Joining:29-37. Publication Date (Web): September 27, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.5.5

Fabrication of Al-11.2Si Components by Direct Laser Metal Deposition for Automotive Applications (Research Paper)

Amrinder Singh, Abhishek Ramakrishnan, Guru Dinda

Journal of Welding and Joining:67-73. Publication Date (Web): July 20, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.4.10

Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium (Research Paper)

Jae-Deuk Kim, Eun-Geun Jin, Siva Prasad Murugan, Yeong-Do Park

Journal of Welding and Joining:6-15. Publication Date (Web): August 25, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.4.2

Influence of the Welding Speeds and Changing the Tool Pin Profiles on the Friction Stir Welded AA5083-O Joints (Research Paper)

M. M. El-Sayed, A. Y. Shash, M. Abd Rabou

Journal of Welding and Joining:44-51. Publication Date (Web): June 30, 2017 Cited by 1

DOI: https://doi.org/10.5781/JWJ.2017.35.3.7

Laser Cladding with Al-36%Si Powder Paste on A319 Al Alloy Surface to Improve Wear Resistance (Research Paper)

Hyoung-Keun Lee

Journal of Welding and Joining:58-62. Publication Date (Web): April 28, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.2.9

Effects of Brazing Current on Mechanical Properties of Gas Metal Arc Brazed Joint of 1000MPa Grade DP Steels (Research Paper)

Wook-Je Cho, Tae-Jin Yoon, Sung-Yun Kwak, Jae-Hyeong Lee, Chung-Yun Kang

Journal of Welding and Joining:23-29. Publication Date (Web): April 28, 2017

DOI: https://doi.org/10.5781/JWJ.2017.35.2.4

Microstructure and Mechanical Properties of Gas Metal Arc Brazed Joint of DP Steel with Cu-Si Filler Metal (Research Paper)

Wook-Je Cho, Tae-Jin Yoon, Sung-Yun Kwak, Jae-Hyeong Lee, Chung-Yun Kang

Journal of Welding and Joining:70-76. Publication Date (Web): October 30, 2016

DOI: https://doi.org/10.5781/JWJ.2016.34.5.70

Effect of Weld Elastic Modulus on Simulation of Stress Concentration and Fatigue Life for Boiler Vessel (Research Paper)

Byung Hak Choe, Bum Gyu Lee, Jong Heon Shim, Chan Sung Park, Jin Pyo Kim, Nam Gyu Park

Journal of Welding and Joining:47-53. Publication Date (Web): October 30, 2016

DOI: https://doi.org/10.5781/JWJ.2016.34.5.47

Microstructure and Creep Fracture Characteristics of Dissimilar SMA Welds between Inconel 740H Ni-Based Superalloy and TP316H Austenitic Stainless Steel (Research Paper)

Kyeong-Yong Shin, Ji-Won Lee, Jung-Min Han, Kyong-Woon Lee, Byeong-Ook Kong, Hyun-Uk Hong

Journal of Welding and Joining:33-40. Publication Date (Web): October 30, 2016

DOI: https://doi.org/10.5781/JWJ.2016.34.5.33

Effect of Heating Rates on Microstructures in Brazing Joints of STS304 Compact Heat Exchanger using MBF 20 (Research Paper)

Jun-Tae Kim, Hoe-jun Heo, Hyeon-Jun Kim, Chung-Yun Kang

Journal of Welding and Joining:46-53. Publication Date (Web): April 30, 2016 Cited by 1

DOI: https://doi.org/10.5781/JWJ.2016.34.2.46

Recent Studies of Laser Metal 3D Deposition with Wire Feeding (Research Paper)

Dong-Hyuck Kam, Young-Min Kim, Cheolhee Kim

Journal of Welding and Joining:35-40. Publication Date (Web): February 29, 2016 Cited by 1

DOI: https://doi.org/10.5781/JWJ.2016.34.1.35

Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry (Review Paper)

Ashutosh Sharma, Y.S. Shin, Jae-Pil Jung

Journal of Welding and Joining:1-8. Publication Date (Web): October 30, 2015

DOI: https://doi.org/10.5781/JWJ.2015.33.5.1

Evaluation of mechanical properties on friction stir lap jointed Al6061/HT590 alloys (Special Issue)

Eun-Hye Kim, Kwang-Jin Lee, Kuk-Hyun Song

Journal of Welding and Joining:8-13. Publication Date (Web): April 30, 2015 Cited by 2

DOI: https://doi.org/10.5781/JWJ.2015.33.2.8

Recent R&D status on friction stir welding of Ti and its alloys (Special Issue)

Duck-soo Kang, Kwang-jin Lee

Journal of Welding and Joining:1-7. Publication Date (Web): April 30, 2015

DOI: https://doi.org/10.5781/JWJ.2015.33.2.1

577

Cracking Susceptibility of Laser Cladding Process with Co-Based Metal Matrix Composite Powders (Research Paper)

Changmin Lee, Hyungkwon Park, Changhee Lee

Journal of Welding and Joining:577-582. Publication Date (Web): December 31, 2014 Cited by 2

DOI: https://doi.org/10.5781/JWJ.2014.32.6.41

495

Correlation of Microstructure and Tribological Properties of Mo Blended Fe-Base Coatings Fabricated by Atmospheric Plasma Spraying (Research Paper)

Illjoo Lee, Hyungkwon Park, Changhee Lee

Journal of Welding and Joining:495-501. Publication Date (Web): October 30, 2014

DOI: https://doi.org/10.5781/JWJ.2014.32.5.65

Effect of Heat Input of Outside Weld on Low Temperature Toughness of Inside Weld for Multiple Electrode SA Welded API 5L X70 with Sour Gas Resistance (Research Paper)

Hyun-Jun An, Hee-Keun Lee, Young-Gyu Park, Seong-Su Eun, Chung-Yun Kang

Journal of Welding and Joining:93-101. Publication Date (Web): February 27, 2014 Cited by 1

DOI: https://doi.org/10.5781/JWJ.2014.32.1.93

Effect of Hot-stamping on Microstructures and Tensile Properties of Al-Si Coated Boron Steel Welds with Laser Source (Research Paper)

Myeong-Hwan Oh, Jong-Pan Kong, Min-Suck Kwon, Chung-Yun Kang

Journal of Welding and Joining:96-106. Publication Date (Web): January 21, 2014 Cited by 3

DOI: https://doi.org/10.5781/KWJS.2013.31.6.96

Effects of High Current and Welding Wire Diameter on the Magnesium Vaporization and Mechanical Properties of Al5083 Arc Welds (Research Paper)

Heimi Kwon, Chul-ho Park, In-Pyo Hong, Namhyun Kang

Journal of Welding and Joining:84-89. Publication Date (Web): January 21, 2014

DOI: https://doi.org/10.5781/KWJS.2013.31.6.84

Bead Shape and Conditions of Friction Stir Processing to Improve Fatigue Strength (Research Paper)

Jeong-ung Park, Gyu-baek An, Heung-ju Kim, Byeong-cheol Jo

Journal of Welding and Joining:73-79. Publication Date (Web): August 31, 2013 Cited by 1

DOI: https://doi.org/10.5781/KWJS.2013.31.4.73

Effect of Bonding Condition on the Tensile Properties of Diffusion Bonded Haynes230 (Research Paper)

Gil-Mo Kang, Ae-Jeong Jeon, Hong-Kyu Kim, Sung-Suk Hong, Chung-Yun Kang

Journal of Welding and Joining:76-83. Publication Date (Web): June 30, 2013 Cited by 1

DOI: https://doi.org/10.5781/KWJS.2013.31.3.76

Effect of Coating Thickness on Microstructures and Tensile Properties in Yb:YAG Disk Laser Welds of Al-Si Coated Boron Steel (Research Paper)

Wei-Ye Cao, Jong-Pan Kong, Yong-Nam Ahn, Cheol-Hee Kim, Chung-Yun Kang

Journal of Welding and Joining:66-75. Publication Date (Web): June 30, 2013 Cited by 1

DOI: https://doi.org/10.5781/KWJS.2013.31.3.66

Microstructure and Tensile Strength Property of Arc Brazed DP steel using Cu-Sn Insert Metal (Research Paper)

Wook-Je Cho, Young-Ho Cho, Jung-Gil Yun, Chung-Yun Kang

Journal of Welding and Joining:58-64. Publication Date (Web): June 5, 2013

DOI: https://doi.org/10.5781/KWJS.2013.31.1.58

106

Effect of Brazing Condition on Tensile Properties in Brazing Joints of Inconel-625/Ni-201 Using MBF-30 (Research Paper)

Jeong-Woo Yu, Sang-Hyun Park, Chang-Su Kim, Chung-Yun Kang

Journal of Welding and Joining:106-112. Publication Date (Web): December 23, 2012

DOI: https://doi.org/10.5781/KWJS.2012.30.6.106

Development of Microstructure and Mechanical Properties of Friction Stir Lap Jointed Invar 42/SS 400

K.H. Song, Kazuhiro Nakata

Journal of Welding and Joining:34-39. Publication Date (Web): November 30, 2012

DOI: https://doi.org/10.5781/KWJS.2012.30.5.34

Hardness Distribution and Microstructures of Electric Resistance Spot Welded 1GPa Grade Dual Phase Steel

Hye-Sung Na, Jong-Pan Kong, Tae-Kyo Han, Kwang-Geun Chin, Chung-Yun Kang

Journal of Welding and Joining:76-80. Publication Date (Web): May 16, 2012

DOI: https://doi.org/10.5781/KWJS.2012.30.2.76

Effect of Nitrogen Volume in Ar-N2 Shielding Gas on Microstructure and Hardness of GTA Welded Pure Ti

Hyun-Jun An, Ae-Jeong Jeon, Jae-Keun Hong, Bo-Young Jeong, Jong-Sub Lee, Chung-Yun Kang

Journal of Welding and Joining:70-75. Publication Date (Web): May 16, 2012

DOI: https://doi.org/10.5781/KWJS.2012.30.2.70

1 | 2 |

Register for e-submission

Manuscript Submission

To submit a manuscript, please visit the Journal of Welding and Joining e-submission management system at http://submit.e-jwj.org, read the Instructions for Authors, and log into the Journal of Welding and Joining e-submission system. For assistance with manuscript submission, please contact: koweld@kwjs.or.kr.

Free archive

Anyone may access any past or current articles without logging in.